Pumps and Related Parts

This 230V Laing E-10 pump with a 1" Barb Suction and Pressure Side which measures about 1" Outside Diameter and the hose is 1" Inside Diamater  is compact and lightweight, less than 5 lbs. It is...

Half Union Fitting Complete Set... The Threaded side measures about 2 3/8" Inside and the Slip Glue end measures about 1 7/8" Inside Diameter... Note: Although this measures very much like a 1 1/2"...

Features: 12 & 3 OÕclock Conduit Entries40¡C Ambient ¥ Class B InsulationRotation: CCW Pump EndThrough Bolt Mount48/56 Base Mounting3-1/2Ó Shaft Height Four Thru Bolts on a 5.146 Bolt Circle

This part is an Impeller for a Sta-Rite DuraJet DJ Wet End that would be called 1.0hp-1.5HP, your motor should be 8.0-9.0Amp at 230V or 16.0 Amps at 115V.. The number on the back of the impeller will...

This complete pump is a Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2"...Spa Pump Features:Executive wet end designed specifically for 48-frame motorsLarge 6-1/2" diameter wet end for higher head...

AMP Style 3 wire Cord With Male Plug to be used with (1) Speed Pumps, Blower Motors, Ozonators, Power Supplies and any other 3 wire appliance that requires an AMP plug to connect to the control box.....

This impeller is no longer avaialve from the manufacturer but the one at this link wil work in its place: Impeller, Aqua-Flo, XP3, 4.0hp, For XP3 Pump 2 1/2" x 2 1/2" Wet End This part is a Waterway...

Start Capacitor1-13/16"dia x 3-3/8"hgt

This Impeller is obsolete but there is an Impeller that will work but there is only one choice and it will look different than your old impeller: Impeller, Vico Ultima Ultra Jet Flo,4...

This Wet End is a 2" x 2" 4.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 14.0 Amps High speed there are no 115v versions of this wet end..  This side discharge,...

Balboa / Sta-Rite Dura-Jet wetend in 3HP. Also known as the DJ this high flow side discharge wetend can be mounted to 48 or 56 frame motors. This side discharge model has 2" unions that will measure...

Start Capacitor1-7/16"dia x 2-3/4"hgt