Waterfall Control Valves & Related Parts

Diverter stem for the Waterway Top Access 1" diverter valves. This style diverter stem is not as common and is used in Waterway diverter valves that were designated as Single Side Outlet.  Please review the pictures to be sure you have the correct...

This Jet Body Connect Kit is (6") of 3/4" Clear Tubing with (1) 3/4" x 3/4" Smooth Barbed Coupler and (2) 3/4" Clamps, (4") of 3/8" Clear Tubing and (1) 3/8" x 3/8" Barbed Coupler..   This kit is used to Connect the 3/4" Barbed fitting on the water...

This item is a 6 Spoke 3 5/8" Wide Diverter Knob for a 1" Waterfall or Neck Jet Control.. The outside measurement is about 3 5/8" and the center hole is about 1/2".. NOTE: There is an Air Control version of this know that measures about 3 1/4" wide...

This item is a 3 5/8" wide 6 Spoke Watefall or Neck Jet Control Diverter Knob, Diverter Cap and O-ring Kit for a 1" Waterfall or Neck Jet Control.. The inside thread measurement is about 1 5/8" and the center hole is about 3/4".. It uses (2) Small...

This part is a Cal Spa Silver Waterfall Control Cap 2 9/16" Wide Teardrop Style  only.  This Waterfall Cap Slides on the Diverter Valve Stem is used to operate the Wateffall Control Valve and is for Cal Spas.   This Part is...

This part is a 2 1/2" Titanium colored 1" Waterfall or Neck Jet Control Cap.  This Cap Screws onto the Control Body that measures about 1 3/4" wide and Slides over the Diverter Valve Stem is used to operate a Waterfall...

Waterway Cascades waterfall assembly with clear plastic plumbing manifold. This waterfall installs into your spa shell via two 7/8" holes and accepts 3/4" id vinyl installed over the included 3/4" ribbed hose barb. Waterfall Overall Dimensions 8" x...

This kit is a Gray Waterfall Valve Connect Kit with 90 and Straight to Connect to Ringlet Style Hose.  You will need glue and you can find it here: PVC Leak Loc Low Voc Hot Blue Glue 4oz for Hot Tub Spa PCV Plumbing Repair   This kit...

Two tone Marquis Spa 1" on/off valve for the neck jets. This assembly includes cap, handle, valve ste, body and all o-rings to either transfer to your existing plumbing or to replumb completely. If replumbing you may need 1" to 3/4" barbed adapters. The...

Genuine Jacuzzi 1" on/off waterfall control valve assembly in gray and black two tone design. Used on the 2015+ J500 series and others. This assembly includes the handle, cap, gaskets/o-rings and body. If you just need the cap and handle this is still...

This part is an Obsolete Spa Part Waterway Water Feature Pop Up Fountain 2" Face Black Topmount 3/4" Barb 215-0700..  We have (4) of these (3) Black and (1) Blue left probably the last 4 in the world.. 

This part is a Waterway Water Feature Arc Style Fountain with 2 1/8" Face in Dark Silver Glitter.. This part is a Topmount style with a 3/4" Barb..  If you need the parts inside of this or the cap they are not sold seperately..