Aqua-Flo 230V 56 Frame Pumps

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a new release from Aqua-Flo designed to be a less expensive replacement for Aqua-Flo XP2e  This pump is a...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 56 frame XP2e 3.0HP 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about...

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

This pump is a Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage is 12 Amps on High Speed and 3.5 Amps on Low making it a 3.0...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...

This pump is a 56 frame XP3 or FMXP3 called 2.5HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about 3 5/8" edge to edge and 2 1/2" pressure side which measures about 3 5/8" edge to edge. The amperage is 11.4 Amps on High Speed...

This pump is a 56 frame XP3 or FMXP3 called 4.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about 3 5/8" edge to edge and 2 1/2" pressure side which measures about 3 5/8" edge to edge. The amperage is 15.0 Amps on High Speed...

This pump is a 56 frame XP3 or FMXP3 called 3.0HP 230V Side Discharge wet end with a 2 1/2" suction side which measures about 3 5/8" edge to edge and 2 1/2" pressure side which measures about 3 5/8" edge to edge. The amperage is 11.9 Amps on High Speed...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...