Complete Heaters

Low flow square back style heater assembly for Dimension One (D-1) hot tubs and spas that utilize the M-Class control system. This 1" heater with dual titanium elements wraps around the control box and has 4 wire connections that connect to your circuit...

Balboa 5.5 KW Titanium heater assembly with stud. Can be run at 230 volts for the full 5.5 KW or at 115 volts for 1.5 KW. This Flo Thru heater has 2" unions that measure 3" on the inside and is 15" in length, measured from flange to flange. Now comes...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 6000 76227 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

This part is a Heater Complete with the Sensor set and built in pressure switch an exact generic replacement for the original Watkins No Fault 4000 76228 heater... This is a generic replacement for the various versions of Watkins/Hot Spring/Tiger...

This part is a Hydro Quip Versi-Heat remote heater replacement assembly. The metal tube measures 2" x 13" with a 5.5 kilowatt, 230v heater element inside. Some versions are 4.5kw but this one will work in place of that version without issue. The black...

Mounting Kit used to attach the Universal Rite-Fit Low 3" Flow Vertical Heaters to your spa pack or control box to match the OEM configuration. Includes bracket, clamp and hardware.

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.0kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 1 1/2" pipe which would measure about 1 7/8" OD.. You could use it wil 1" pipe with a reducer bushing....

This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/Jacuzzi

This part is an Adapter, Drain Plug, Sundance / Jacuzzi, 1/4" MPT x 3/8" Ribbed Barb, Stainless Steel, Less O-Ring.. Used on Various J-200, J-300, J-400, J-500, J-LX Series Spa Pump HeadsO-Ring is Required, Teflon Tape Not Used Click here for the...

Popular 3.0 KW flow thru 15" heater with stud made by Balboa for European and 50 Hz systems that utilize the M7 heater design. Can be found in the Balboa VS, GS and BP systems. The assembly includes two new M7 sensors, tailpieces, union gaskets and a...

This Part is a Set of (2) NON-Standard 2" Heater Union Gasket with a 2 5/8" Center to Center Lip. Note: If you can't measure your heater union groove size we offer a set with both sizes Click this link: Set of (4) Hot Tub Spa 2"...

Balboa 4.0 KW (4000 watt) 15" flo-thru heater with 2" unions. This popular heater is found on older legacy models of Balboa spa packs and controls such as the light leader and early M2 and M3 systems (pre M7). Includes the pressure switch with guard...