Ozonators

This part is an Ozone Venturi Injector, Ozone, AquaSunOzone, 3/4" Barb X 3/4" Barb x 1/4" Barb that is used inline to create suction to pull Ozone Gas from an Ozonator into the Hot Tub water. This Injector can be used in place of the Mazzei...

This part is a Ozone Check Valve, Del Ozone, 1/4"barb x 1/4"barb, Deluxe If this valve is bad you will get water in the Ozonator and possibly voltage in the water if your GFCI is not wired correctly or a breaker trip if it is wired correctly....

This part is a Ozonator, Del Ozone UO3, Gen 3, CD, 115v/230v, Mini Molded Cord, J&J.. Ozonator Application Spa Manufacturer Del Ozone Ozonator Complete Complete Ozonator Ozonator Model UO3 Ozonator Cord Type Molded,...

This part is a Ozonator, JED, Corona Discharge, 230V, w/4 Pin Amp Cord JED 103-DescriptionThe JED103 is a CD or "corona discharge" type ozone generator designed for water purification in residential or commercial hot tubs, swim spas, fountains and lap...

This part is a Ozonator, JED, Corona Discharge, 115V, w/4 Pin Amp Cord JED 103-DescriptionThe JED103 is a CD or "corona discharge" type ozone generator designed for water purification in residential or commercial hot tubs, swim spas, fountains and lap...

This part is a Ozone Flash Reactor Replacement with a  3/4" Barb X 3/4" Barb connection.. It is used as a Mixing Chamber Mazzei on Ozone systems for Jacuzzi, Sundance, Master Spa and others..

This ozonator is obsolete click here for the newest version Generation 3: Ozonator, Del Ozone UO3, Gen 3, CD, 115v/230v, Mini Molded Cord, J&J This part is a DEL SpaEclipse Gen 2, CD, 115v/230v, Mini Molded Cord, J&J Plug End Ozonator....

This part is a Complete 1 5/8" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/8 to 1 1/4" Hole Size, 3/4" Barb, Gray..  This part does not come with a gasket and will require silicone found here: 1/2 Oz Silicone

This part is a Complete 1 5/8" Face, Jet Assembly, Waterway, Ozone, Swirl Face, 1 1/8" to 1 1/4" Hole Size, 3/4" Barb, Dark Gray.. 

This part is a Complete Jet Assembly, CMP, Ozone, Smooth Face, 1 5/8" Face, 1 1/8-1/4" Hole Size, 3/4" Barb, Gray in color.. 

This part is a Jet body that is used with HydroAir Fixed 1 1/2" Wide Face Bullet or Ozone Style Jets...Rated at 3-4 gpm and requires a 3/4" hole in the shell.. The pipe connection is 1/2" which measures about 3/4" OD... For Jet Faces used with this body...

No longer Available.. This part is a White Fixed 1 1/2" Wide Face Bullet or Ozone Style Jet Assembly...Rated at 3-4 gpm used with a HTP55-470-3750 Jet body only   Jet Part Type    InternalManufacturer  ...