Waterway Circulation Pumps

In this video The Spa Guy shows you how to repair a broken Hot Tub Pump Union without cutting plumbing out and using an Emergency Pump Union Split Nut Kit...      #sparepair #hottubrepair  #thespaguy...

This video is about The Spa Guy showing How To diagnose a FLO Code on a Catalina Spa with Balboa Controls.. it is a similar process on other brands as well...    #sparepair #hottubrepair spaguy #thespaguy Save Save Save Save

This video is about The Spa Guy shows you how he diagnosed a bad Pressure Switch for a FLO Code after the tub was powered up...     #sparepair #hottubrepair Save Save Save Save

You are buying a set of (2) 1"FTB X 1" Barb Pump Unions with O-ring that matches the Unions. The Union receives a 1" Inside Diameter Hose which measures about 11/4" on the outside and then Screws to a 1" Wetend (Pump) Threaded...

You are buying a set of (2) 1"FTB X 3/4" Barb Pump Unions with O-ring that matches the Unions. The Union receives a 3/4" Inside Diameter Hose which measures about 1" on the outside and then Screws to a 1" Wetend (Pump) Threaded...

You are buying a Set of (2) 1"FTB X 1" Slip Pump Unions with O-ring that matches the Unions. The Union receives a 1" Inside Diameter which measures about 1 1/4" on the outside pipe or fitting on one side and then Screws to a...

This part is a Set of (2) 1 1/2" Slip X 1 1/2" Pump Unions with Gasket or O_Ring that matches Unions. See Pictures for measurements. The Union receives a 1 1/2" pipe or fitting on one side and then Screws to a 1...

This part is aStandard 2 1/2" Pump Union O-Ring. The O-Ring is 2 1/2" Center to Center across and fits some unions but there are exceptions so please see the pictures and compare. This part is used in hot tubs between a pump union and...

You are buying a 1" FTB X 1" Barb Pump Union with O-ring that matches the Union. The Union receives a 1" Inside Diameter Hose which measures about 11/4" on the outside and then Screws to a 1" Wet End (Pump) Threaded Part on the...

This is a Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

AMP Style 3 wire Cord With Male Plug to be used with (1) Speed Pumps, Blower Motors, Ozonators, Power Supplies and any other 3 wire appliance that requires an AMP plug to connect to the control box... Black Is High Speed, White Is Common and Green is...

This Pump is a 1 1/2" Side Discharge x 1 1/2" pump which measures about 2 3/8" across the threads edge to edge. This pump is a 115V and we do offer this same pump in a 230V verison ASP34-270-1050 click on the number for the other pump. The...