Hot Tub Parts of America

(3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps

(No reviews yet) Write a Review
SKU:
HTP16-LL00
Shipping:
Calculated at Checkout
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • Notice the shape of the pin housings the two outside ones are flat on one side.. The Green and Black wires would normally be oriented like this..
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
  • (3) Wire amp Cord 16/3 x 48, for Blower and (1) Speed Pumps
MSRP: $27.99
$22.99
— You save $5.00

Description

AMP Style 3 wire Cord With Male Plug to be used with (1) Speed Pumps, Blower Motors, Ozonators, Power Supplies and any other 3 wire appliance that requires an AMP plug to connect to the control box...

Black Is High Speed, White Is Common and Green is ground... On this 4 Amp plug there will be a space between the Black and White Wire which is correct for most systems.. including but not limited to Balboa, Gecko, Hydro-Quip, Spa Guts and Len Gordon...

Note: With Blowers you will not need spade connectors you will have to clip them from this cord..

Cord Type

  Plug, Cord
Female End Plug Style Slide Connector, 1/4" Female
Appliance Blower
Male End Plug Style AMP, 4 Pin
Cord Length 48"
Blower Cord Length 48"
Wire size/Number of wires 16/3
Blower Cord Amperage 12A
Voltage 115v/230v
Cord Amperage 13A
View AllClose