Dynasty Hot Tub Parts

This part is a 2 1/2" Titanium colored 1" Waterfall or Neck Jet Control Cap.  This Cap Screws onto the Control Body that measures about 1 3/4" wide and Slides over the Diverter Valve Stem is used to operate a Waterfall...

This part is a Housing Mount Kit for Skimmer Weir Door some Dynasty or Waterway Filter.. The kit features (2) Mounts and (4) Screws.    This Part is used in Dynasty and Bahama Spa Hot Tubs to hold the weir door in place and Many Others...

This part is a Dynasty Filter Assembly Skimmer Weir Door, Light Gray.. 14 7/8" x 6"..   This Door can require this kit too.. Housing Mount Kit for Skimmer Weir Door some Dynasty or Waterway Filter   This Part is used in Dynasty and...

This part is a Oval or Rounded Shape Dynasty Hot Tub Pillow for a Neck Seat, 1139, Black.   It is about 11" long and 4 5/8" Wide it has 2 tabs on the back that are about 6" apart.   It could have 1139 or 1139 B-1, 1139 B2, 1139 B3...

This part is a Filter for Rainbow Pentair Predator-II-Mini (172212x) 25sqft 13-5/16" Tall X 4-15/16" Wide (2) 2 1/8" Holes..

This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version.  NOTE:...

This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge.. This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures about 2 3/8" edge to...

This part is a D-Tec 2 (1) Amp 2PSI Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections and is Ideal for applications where a larger switch will not fit. This Switch is a...

This part is a Clear 18 Rib Orion 3 5/8" Spa Diverter Cap only.  This cap is thicker at 13/16" Thick and most caps are 23/32" thick.. It measures 3 5/8" Edge to edge and the thread width is about 2 3/4" wide.. This Diverter Cap mounts on top...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...

This part is a 3 3/8" Wide Air Valve Clear LED Bezel that fits some Dynasty Air Valves. This parts has to thread onto the air control so keep in mind if your air control is plumbed in you will have to cut the plumbing to thread this on the air...