Board with Heater and Topside Retrofit Kits

Balboa BP2000 retro-fit control system with TP700 Color LCD topside control panel. This high end BP2000 system is Balboa's top of the line unit offerring multiple pump support and feature rich settings for filtration, purge times and much more. This...

This Plumbing & Glue kit is used to change from a Cal Spa Dually Pump setup to a single Pump set up since the dually pump has been discontinued.. You will have to modify the plumbing and note that this kit is for most applications and may not be...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

The next generation feature rich Balboa BP7 control system with a 5.5KW heater bundled with the sleek rounded rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system,...

The MODPACK 202 is a universal replacement spa control system for a (2) Pump and Blower System with or without a Circulation Pump. Heater assembly is 15″ long, has 2" unions (3" ID on female threads) and it is mounted to the bottom of the control...

The MODPACK 202 Low Flow is a universal Low Flow replacement spa control system for (1)Circluation Pump (2) Jet Pumps and Blower System and 12V light. Heater assembly is 15″ long with a 3/4" Barb Connection kit, it is mounted inside of...

The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system, panel,...

The ePACK is a universal replacement spa control system that features a water sensor instead of a pressure or flow switch so this pack will work plumbed in the pressure or suction side. Heater assembly is 15″ long, it is mounted to the...

The BP Series WiFi Module Kit allows you to access your hot tub via a direct connection anywhere in the local proximity of your tub, anywhere in your house that you can connect to your local WiFi network, or anywhere in the world you have an...

This part is an optional add on to any ModPack to make the system operate a fiber optic system.. You need to let us know if your fiber box is 115v or 230v when you purchase this.. Note: This is to be purchased when you purchase a ModPack that can be...

The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP500 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system, panel,...