1 1/2" x 1 1/2" Wet End 48 Fr Pumps
1 1/2" x 1 1/2" Wet End Pumps measure about 1 3/8" across the threads on the Pressure and Suction sides.
Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5 The 10.0 is the high amperage in this example.
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8 The 10.8 is the high amperage in this example and would equate to a 1 HP.
8.0 = .5 HP
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor.
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label.
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
- Product
- Qty in Cart
- Quantity
- Price
- Subtotal
-
O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125" Cord Diameter
Hot Tub Parts of America
MSRP: $6.99$4.99This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/JacuzziMSRP: $6.99$4.99 -
2X Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of Each Size
Hot Tub Parts of America
MSRP: $33.94$22.98NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Set of 2X Universal 1 1/2" Pump Union Gasket/O-Ring Kit. 6 Items total.. There are three possible sizes on a...MSRP: $33.94$22.98 -
Universal 1 1/2" Pump Union O-Ring or Gasket Kit One of Each Size
Hot Tub Parts of America
MSRP: $16.97$12.99NOTE: This gasket does not fit your Coleman SALUSPA DO NOT order it.. Click this link to see Saluspa Gaskets.. Saluspa This is a Universal 1 1/2" Pump Union Gasket/O-Ring Kit. There are three possible sizes on a 1 1/2" Pump union measuring in the...MSRP: $16.97$12.99 -
Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket
Hot Tub Parts of America
MSRP: $31.96$14.99This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...MSRP: $31.96$14.99 -
Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
Hot Tub Parts of America
MSRP: $13.99$9.99This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...MSRP: $13.99$9.99 -
Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
Hot Tub Parts of America
MSRP: $8.99$6.99This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...MSRP: $8.99$6.99 -
Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting
Hot Tub Parts of America
MSRP: $21.99$16.99This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...MSRP: $21.99$16.99 -
Spa Hot Tub Pump Universal Connect Kit Air Bleeder Plug 1/4" Mpt X 3/8" Barb with Sealer Fitting
Hot Tub Parts of America
MSRP: $19.99$14.99This Kit is a Universal Air Bleeder Connect Kit with (1) 1/4" Mpt X 3/8" Barb Plug, (1) 3/8" x 3/8" Barb Coupler, (4") of 3/8" Clear Tubing and Silicon sealer usually used on Hot Tub Pump Faces to bleed the air off the pump while filling the tub up. I...MSRP: $19.99$14.99 -
Barb Adapter Connect Kit, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP
Hot Tub Parts of America
MSRP: $17.99$11.99This kit is an Air Bleeder Barbed Plug Connect Kit that features a Barbed Plug that is 1/4" MPT x 3/8" Barb, (1) 3/8" x 3/8" Barbed Coupler, 4" of 3/8" clear tubing and Silicon sealer usually used on a Aqua-Flo and CMP Hot Tub Pump Faces to bleed the air...MSRP: $17.99$11.99 -
Dynasty Pump Barb Bleeder Connect Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
Hot Tub Parts of America
MSRP: $34.99$24.99This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...MSRP: $34.99$24.99 -
Dynasty Pump Barb Bleeder Base Kit (2) 1/4" Mpt X 3/8" with Silicon Kit Waterway Pump Fittings
Hot Tub Parts of America
MSRP: $16.99$13.99This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...MSRP: $16.99$13.99 -
Pump Air Bleeder 1/4" Mpt X 3/8" Barb with Sealer Fitting Dimension One
Hot Tub Parts of America
MSRP: $29.99$19.99You are buying an Air Bleeder Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug. This style set up is is usually found in Dimension One Hot Tubs in the Filter area and other brands as well.. Note; The plug is not sold...MSRP: $29.99$19.99