Bottom Drains and Drain Valves

This part is a Drain Valve with 3/4 inch Barb that is found on some Jacuzzi or Sundance Hot Tubs.. This valve features a hole size of 1 5/16", Receives clear vinyl tubing on one end with the 3/4" barb and a garden hose fitting on the other end....

This part is a Waterway Brand Drain Valve with a Pull Handle for a On/Off Valve, Water Hose Cap... This valve features a 3/4" Slip flex pipe connection.. The pipe that glues into this would measure 1" OD.. FEATURES: Low profile design Hose bib...

Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...

This part is a Drain Cap with a Pull Handle for a Waterway Brand On/Off Valve, Water Hose Cap... Note: Colors can vary Black, White or Green NOTE: This Cap will only work on Waterway Brand Drains do not order for any other brand.. I put an example of...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" slip or 1" Street, Gray, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one...

This part is a Drain Valve with 1/2" inch Slip Glue In style fitting.. If you need to make this a barb style click here for the kit: 3/4" Tubing Barb Connect Kit with Glue, 3/4" Barb x 3/4" Smooth Barb with Clamps and Tubing For the Large Valve Click...

This part is a Magic Plastics Drain Valve that mounts through the side wall with a removable front nut to release it from the side panel.. It features a 3/4" Barb and measures about 7" Long overall.. If you need the smaller version of this valve it can...

This part is a Hot Tub Replacement Bottom Drain Inside Wall Fitting with a 3/4" slip fitting on each end which measures about 1" I.D.. This part is on the foam side of the tub and the Fitting screws into this fitting.. You have to stand the hot tub up...

This part is a Tee that is 2"Slip x 2" Slip x 3/4" FPT.. This part is usually found in plumbing with spigot screwed into it.. Note there are 2 Spigot sizes 3/4" and 1/2" Threaded..   If you need a spigot that threads into this tee click this...

This kit is a Dark-Sliver-Glitter, Hot Tub Replacement Bottom Drain Kit with a 3/4" slip barb fitting which measures about 3/4" O.D.. The kit that is it comes with is used to convert the old style 3/4" to 1" Flex Lines to a 3/4" Barb set up.. This...

This kit is a Gray Hot Tub Replacement Bottom Drain Kit with a 3/4" slip barb fitting which measures about 3/4" O.D.. The kit that is it comes with is used to convert the old style 3/4" to 1" Flex Lines to a 3/4" Barb set up.. This part comes with the...

This part is a Hot Tub Replacement Gray Bottom Drain Assembly with Wall Fitting and a 3/4" slip barb fitting which measures about 3/4" O.D.. This part comes with the housing, wall fitting, gasket and thread in face.. You have to stand the hot tub up...