2" x 2" Wet End 48 Fr Pumps

2" x 2" Wet End 48 Fr Pumps

2" x  2" Wet End Pumps measure about 3" across the threads on the Pressure and Suction sides.

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener

    Pump Motor Base with Screw Kit, Rubber, 48 & 56 Frame, Vibration Dampener

    MSRP: $23.99
    $17.99
    This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...
    MSRP: $23.99
    $17.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $17.99
    Subtotal:
  • O-Ring,Pump Housing Plug,JACUZZI,Pirahna/Theramax,0.434"ID x 0.682"OD,.125"Cord Dia

    O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125" Cord Diameter

    MSRP: $6.99
    $4.99
    This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/Jacuzzi
    MSRP: $6.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $6.99
    $4.99
    Subtotal:
  • Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket

    Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket

    MSRP: $31.96
    $14.99
    This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...
    MSRP: $31.96
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $31.96
    $14.99
    Subtotal:
  • Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket

    Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket

    MSRP: $15.98
    $8.99
    This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...
    MSRP: $15.98
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.98
    $8.99
    Subtotal:
  • Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing 
The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you verify that you have a 2 5/8" Center to center groove in your union for this O-Ring to fit into.. 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing

    Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

    MSRP: $15.99
    $8.99
    This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...
    MSRP: $15.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.99
    $8.99
    Subtotal:
  • Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $13.99
    $9.99
    This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...
    MSRP: $13.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $9.99
    Subtotal:
  • Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $8.99
    $6.99
    This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Hot Tub 2" Pump Union Slice To Glue Plumbing Connect Kit This is an example of how this kit can be used..

    Hot Tub 2" Pump Union Slice To Glue Plumbing Connect Kit

    MSRP: $61.97
    $54.99
    This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...
    MSRP: $61.97
    $54.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $61.97
    $54.99
    Subtotal:
  • This is an example of how this kit would fit together.. This is an example of how this kit would fit together..

    Hot Tub 2" Pump Union Slice To Plumbing Connect Kit

    MSRP: $42.98
    $39.99
    This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...
    MSRP: $42.98
    $39.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $42.98
    $39.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 1.5hp, 115v, 2-Speed, 48 frame, 2" X  2", 13.3 Amp Old Style and the new style.. You can replace the old style wet end with the new style but most parts will not interchange betweens them..

    Hi-Flo, Pump, Waterway, 1.5hp, 115v, 2-Speed, 48 frame, 2" X 2", 13.3 Amp

    MSRP: $596.99
    $384.99
    This part is a Complete Hi-Flo Side Discharge 1.5HP 13.3/4.1 Amp 48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be...
    MSRP: $596.99
    $384.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $384.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting

    MSRP: $21.99
    $16.99
    This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...
    MSRP: $21.99
    $16.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $21.99
    $16.99
    Subtotal:
  • Total: items /

Adding your products to cart