2" x 2" Wet End 48 Fr Pumps

2" x 2" Wet End 48 Fr Pumps

2" x  2" Wet End Pumps measure about 3" across the threads on the Pressure and Suction sides.

Read this information to Help to determine the Frame and HP.. The way you can determine whether your pump is a 48 or 56 Frame is by measuring the width of the motor. A 48 Frame motor will measure 5 3/4" wide across the back and a 56 Frame will measure about 6 1/2" wide across the back.

 
For 230 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.0/3.5  The 10.0 is the high amperage in this example. 
8.0 = 1 HP
10.0 = 2 HP
12.0 = 3 HP
14.0 = 4 HP
16.0 = 5 HP 
 
For 115 Volt Pumps Look on the label of the motor for the two amperages if you have a 2 speed pump, if its a single speed look for a single amperage. It will look something like this: 10.8/2.8  The 10.8 is the high amperage in this example and would equate to a 1 HP. 
   8.0 = .5 HP 
9.0-10.0 = .75 HP
10.0-13.00 = 1 HP
13.5-15.0 = 1.5 HP
16.0-20.0 = 2 HP
Note: These Amperages are Averages so find the Amperage closest to your pumps Amperage. Note for the Note: 2HP 115V pumps are very rare, do not order one thinking you can add more power. This pump or even a 1.5HP pump will cause your PLug N Play tub to damage the electrical system, Plug, Wires and even the pump motor. 
 
NOTE: Your pump or motor may say a different Horse Power than what you see here, DO NOT go by what is listed on the motor, go by the amperage on the label. 
NOTE for the NOTE: TRUST ME ON THIS, everybody lies about their Horse Power. But the amperage does not lie. Most people are told they have 5 HP pumps, if you do the math two 5 HP pumps at 16 amps is 32 amps. Plus a 5.5 KW heater is 21 amps. That means with both pumps running and the heater on it will draw 53 AMPS. I bet your HOT TUB is on a 50 AMP breaker. Therefore contrary to what you have been told you DO NOT have a 5 or 6 or 7 Hp pump.
 
screen-shot-2015-10-27-at-12.56.04-pm.jpg
  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions  Video How To Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions  Video How To
    Add to Cart

    Set of (2) Hot Tub Spa 2" Slip X 2" Threaded Pump Unions Video How To

    MSRP: $23.99
    $18.99
    This set is a Set of (2) 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union recieves a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the...
    MSRP: $23.99
    $18.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $23.99
    $18.99
    Subtotal:
  • Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X  2", 11.0 Amp Old Style and the new style.. You can replace the old style wet end with the new style but most parts will not interchange betweens them..
    Add to Cart

    Hi-Flo, Pump, Waterway, 1.0hp, 115v, 2-Speed, 48 frame, 2" X 2", 11.0 Amp

    MSRP: $596.99
    $429.99
    This part is a Complete Hi-Flo Side Discharge 1.0HO 11.0/2.9 Amp48-Frame Pump is 2" x 2" which measures about 3" across the threads and is an efficient pump designed for high volume discharge for faster filtering cycles. Please see the pictures to be...
    MSRP: $596.99
    $429.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $429.99
    Subtotal:
  • Pump, Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2", OEM The Suction Side of this pump measures about 3" Across the threads..
    Add to Cart

    Pump, Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2", OEM

    MSRP: $549.99
    $439.99
    This complete pump is a Waterway, Executive, 1.0hp, 115v, 2-spd, 48fr, 2"...Spa Pump Features:Executive wet end designed specifically for 48-frame motorsLarge 6-1/2" diameter wet end for higher head pressure2" intake and dischargeWet end can be rotated...
    MSRP: $549.99
    $439.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $549.99
    $439.99
    Subtotal:
  • Pump, Waterway, Ex2, 2.0hp, 230v, 2-spd, 48fr, 9.0A, 2", XP2 or XP2e Replacement Pump, Waterway, Ex2, 2.0hp, 230v, 2-spd, 48fr, 9.0A, 2", XP2 or XP2e Replacement
    Add to Cart

    Pump, Waterway, Ex2, 2.0hp, 230v, 2-spd, 48fr, 9.0A, 2", XP2 or XP2e Replacement

    MSRP: $586.99
    $474.99
    This Waterway 2.0hp Ex2 Pump is 230v, 2-spd, 48fr, 9.0A, 2"x 2" and it is a perfect XP2 or XP2e Replacement.. This is Waterways answer to an Xp2 pump.. Manufacturer Waterway Pump Model EX2 Speed 2 Speed (2-Spd) Motor...
    MSRP: $586.99
    $474.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $586.99
    $474.99
    Subtotal:
  • Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2" x 2" The Suction Side measures about 3" Edge to Edge Across the Threads..
    Add to Cart

    Pump, Waterway Executive, 1.5hp, 115v, 2-spd, 48fr, 2" x 2"

    MSRP: $596.99
    $474.99
    This pump is a 115V 48 Frame 2" X 2" Waterway Executive (2) Speed 1.5HP 13.3Amp on High and 4.1A on Low..  The Pressure and Suction sides measure about 3" edge to Edge across the threads..  The Waterway Executive 48 pump is thermally...
    MSRP: $596.99
    $474.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $596.99
    $474.99
    Subtotal:
  • Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener
    Add to Cart

    Pump Motor Base, Rubber, 48 & 56 Frame, Vibration Dampener

    MSRP: $14.99
    $11.99
    This part is a Rubber Pump Motor Base Vibration Dampener for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base. This motor base mounting pad fits under any 48 frame pumps, and under most 56 frame...
    MSRP: $14.99
    $11.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $14.99
    $11.99
    Subtotal:
  • Pump, Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", OEM Pump, Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", OEM
    Add to Cart

    Pump, Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", OEM

    MSRP: $719.99
    $519.99
    This Pump is a Waterway Executive, 4.5hp, 230v, 2-spd, 48fr, 2" x 2", 12.0A/3.5A.. The 2" x 2" Threaded fittings measure about 3" across the threads..  Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet...
    MSRP: $719.99
    $519.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $719.99
    $519.99
    Subtotal:
  • Pump, Waterway Executive, 2.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM The Suction Side of this pump measures about 3" Across the threads..
    Add to Cart

    Pump, Waterway Executive, 2.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM

    MSRP: $634.99
    $499.99
    This Pump is a Waterway Executive, 2.0hp, 230v, 2-spd, 48fr, 2" x 2".. The 2" X 2" measures about 3" across the threads.. Spa Pump Features: Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter wet end for higher...
    MSRP: $634.99
    $499.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $634.99
    $499.99
    Subtotal:
  • Pump, Waterway Executive, 3.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM The Suction Side of this pump measures about 3" Across the threads..
    Add to Cart

    Pump, Waterway Executive, 3.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM

    MSRP: $657.99
    $424.99
    This Pump is a Waterway Executive, 3.0hp, 230v, 2-spd, 48fr, 2" x 2", OEM The 2" Fittings measure about 3" edge to edge across the threads..  Spa Pump Features: Executive wet end designed specifically for 48-frame motors Large 6-1/2" diameter...
    MSRP: $657.99
    $424.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $657.99
    $424.99
    Subtotal:
  • Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Adapter, 3/8"b x 1/4"mpt Pump Wet End Face fits Waterway

    MSRP: $11.99
    $8.99
    This part is a Bleeder Barb that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...
    MSRP: $11.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $11.99
    $8.99
    Subtotal:
  • Hot Tub Spa 2" Slip X 2" Threaded Pump Union & Gasket How To Video Pump Union 2" Threaded  x 2" Slip The thread width on the wet end that this union screws on is 3" wide.
    Add to Cart

    Hot Tub Spa 2" Slip X 2" Threaded Pump Union & Gasket How To Video

    MSRP: $12.99
    $9.99
    This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...
    MSRP: $12.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $12.99
    $9.99
    Subtotal:
  • (1X) 2" Split Nut Kit for Pump Union Emergency Repair Video How To (1X) 2" Split Nut Kit for Pump Union Emergency Repair Video How To
    Add to Cart

    (1X) 2" Split Nut Kit for Pump Union Emergency Repair Video How To

    MSRP: $24.99
    $14.99
    This part is a 2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2" Pump Union. The Pump Union Split Nut that measures about 3" on the Inside of the Threaded Side and mounts to the existing Pump Union Body...
    MSRP: $24.99
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $24.99
    $14.99
    Subtotal:
  • Total: items /

Adding your products to cart