Executive Series Wet Ends Waterway

Executive Series Wet Ends Waterway


In These Two Categories you will find Waterway Executive 48 and 56 Frame 2" x 2" Wet Ends where both the Suction" Inlet" and the Outlet "Pressure" Side measure about 3" edge to edge we also have 2 1/2" x 2" where the Suction "Inlet" Side measures about 3 5/8"' edge to edge and the Outlet "Pressure" Side measures about 3" edge to edge.. Click the appropriate Category below.. 

  • Product
  • Qty in Cart
  • Quantity
  • Price
  • Subtotal
  • O-Ring,Pump Housing Plug,JACUZZI,Pirahna/Theramax,0.434"ID x 0.682"OD,.125"Cord Dia
    Add to Cart

    O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125" Cord Diameter

    MSRP: $6.99
    $4.99
    This part is a O-Ring, Pump Housing Plug, JACUZZI, Pirahna/Theramax, 0.434"ID x 0.682"OD, .125"Cord Diameter.. Additional Information Outside Diameter .682 Inside Diameter .434 Type Standard Spa Brands Sundance/Jacuzzi
    MSRP: $6.99
    $4.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $6.99
    $4.99
    Subtotal:
  • Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX Pump Shaft Water Slinger, All Brands
    Add to Cart

    Pump Shaft Water Slinger, All Brands, Waterway , Aqua-flo, Sta-Rite, Vico, LX

    MSRP: $4.99
    $2.99
    This part is a Pump Shaft Water Slinger designed to sling water away from the motor front bearing in case of a seal leak and it fits All Brands of Hot Tub Pumps..   This part goes on the shaft before you install the wet end.. 
    MSRP: $4.99
    $2.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $4.99
    $2.99
    Subtotal:
  • Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket
    Add to Cart

    Set of (4) Hot Tub Spa 2" Heater or Pump Union Gasket Combo (2) 2 1/2" Lip & (2) 2 5/8" Lip Gasket

    MSRP: $31.96
    $14.99
    This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...
    MSRP: $31.96
    $14.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $31.96
    $14.99
    Subtotal:
  • Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket
    Add to Cart

    Hot Tub Spa 2" Heater or Pump Union Gasket Combo (1) 2 1/2" Lip & (1) 2 5/8" Lip Gasket

    MSRP: $15.98
    $8.99
    This Kit is a Combination of the Two Standard Size 2" Heater or Pump Union Gasket (1) with a 2 1/2" Lip Center to Center and (1) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know which size you have...
    MSRP: $15.98
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.98
    $8.99
    Subtotal:
  • Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing 
The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring until you verify that you have a 2 5/8" Center to center groove in your union for this O-Ring to fit into.. 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater  or Pump Union ORing
    Add to Cart

    Set of (2) 2 5/8" Center to Center O-Ring Hot Tub Spa 2" Heater or Pump Union ORing

    MSRP: $15.99
    $8.99
    This Kit is a Set of (2) NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this...
    MSRP: $15.99
    $8.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $15.99
    $8.99
    Subtotal:
  • Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
    Add to Cart

    Barb Adapter with Silicone & O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $13.99
    $9.99
    This part is a Bleeder Barb with Silicone & O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts &...
    MSRP: $13.99
    $9.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $13.99
    $9.99
    Subtotal:
  • Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway
    Add to Cart

    Barb Adapter with O-Ring, 3/8" Barb x 1/4" MPT Pump Wet End Face fits Waterway

    MSRP: $8.99
    $6.99
    This part is a Bleeder Barb with O-Ring that is 3/8" barb x 1/4" Threaded MPT fitting fits Wet End Face Bleeder Plug Holes to attach a Bleeder Line it fits Waterway Executive 48 & 56 Frame Parts & Wetends, Power-Right 9089X, 9094X,...
    MSRP: $8.99
    $6.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $8.99
    $6.99
    Subtotal:
  • Red 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics Red 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics
    Add to Cart

    Red E 2 Part Epoxy Canister Kit Heat Cure Epoxy Sealer for all Metals and Rigid Plastics

    MSRP: $24.99
    $19.99
    Red Epoxy is a new high performance, two-part, heat cured, epoxy repair kit for making permanent repairs on all metals and rigid plastics. Red Epoxy is specifically designed to exhibit a distinct color change when heat cured. Red Epoxy will provide a...
    MSRP: $24.99
    $19.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $24.99
    $19.99
    Subtotal:
  • Hot Tub 2" Pump Union Slice To Glue Plumbing Connect Kit This is an example of how this kit can be used..
    Add to Cart

    Hot Tub 2" Pump Union Slice To Glue Plumbing Connect Kit

    MSRP: $61.97
    $54.99
    This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...
    MSRP: $61.97
    $54.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $61.97
    $54.99
    Subtotal:
  • This is an example of how this kit would fit together.. This is an example of how this kit would fit together..
    Add to Cart

    Hot Tub 2" Pump Union Slice To Plumbing Connect Kit

    MSRP: $42.98
    $39.99
    This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...
    MSRP: $42.98
    $39.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $42.98
    $39.99
    Subtotal:
  • Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 2 HP Executive Wetend A 2" Threaded fitting measures about 3" edge to edge on the suction or pressure side..
    Add to Cart

    Waterway Spa Hot Tub Pump Wet End 2" X 2" 56 Frame 2.0 HP Executive Wetend

    MSRP: $158.97
    $114.99
    You are buying a 2 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be...
    MSRP: $158.97
    $114.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $158.97
    $114.99
    Subtotal:
  • Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting An example of the bleeder system and this barb in use on a Waterway Pump..
    Add to Cart

    Barb Bleeder 1/4" Mpt X 3/8" with Silicon, Coupler and Tubing Connect Kit for Waterway Pump Fitting

    MSRP: $21.99
    $16.99
    This Connect Kit is an Air Bleeder barbed plug, 3/8" X 3/8" Barbed Coupler, 4" of 3/8" Tubing and Silicon sealer usually used on a Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many...
    MSRP: $21.99
    $16.99
    Qty in Cart: 0
    Quantity:
    Price:
    MSRP: $21.99
    $16.99
    Subtotal:
  • Total: items /

Adding your products to cart