Watkins Wavemaster Complete Pumps

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

This Item is a LX 1.0 Horse Power 12.0-13.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Lifesmart Brand Hot Tubs. It may have a Watkins Vendor Code 4081 LX Brand Pump. These pumps usually have the part number 1431501-01 on...

This complete pump and motor is a replacement for 36675-03.. This pump is a 115V or 230V, (1) Speed, 17.0Amp or 8.5Amp, 48 frame 2" x 2" XP2 pump and motor... The 2" inlet and outlet measure about 3" across the threads... Keep in mind if you choose this...

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This part is a Stronger Pump Bleeder Barb that fits some Watkins Wavemaster XP2, XP2E, LX and others.. It is 1/4" Barb x 1/4"Npt and is used with an unusual bleeder line.. The line is 1/4" Inside Diameter not 3/8" Inside Diameter like most bleeder lines....

This part is a Pump Bleeder Barb for some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. These pumps usually have the part number WBC150 on the label for an Intertek Pump.  Manufacturer Lingxiao-Pump Pump Model WBC Speed 1...

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump found in some Hot Tubs. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version...

This 1431701-03 Vendor Code 3536 48Fr  LX Pump 2" X 2" 1.5HP 2 Speed 115V Complete Pump and motor.. This pump is a replacement for the orginal 1431701-03 pump found on some 3536 Code hottubs.. NOTE about Watkins Wavemaster Complete Pumps:...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081. Impeller Type   Closed Face Impeller Diameter...

This 1.5 Horse Power 39583-03 13.8/3.8 Amp (2) Speed 48 Frame Complete Pump is a replacement Watkins Wavemaster LX Brand Pump. These pumps usually have the part number 39583-03 on the label for a Watkins Version. It is about 7 1/4"" across the face of...