Intertek 230V 56 Frame Pumps

This part is a (4) Bolt head Screws and Washer Kit for 48 or 56 frame pumps used to mount pump motors down on wood based hot tubs. . Includes  (4) Screw head 1 1/8" Screws and (4) Washers.  Note: Rubber mount not included in this listing it can...

This part is a Rubber Pump Motor Base Vibration Dampener with (4) Bolt head Screw and Washer Kit for 48 and 56 frame pumps. Includes 4 soft 'washers' to isolate mounting screws from touching the motor base along with (4) Screw head 1 1/8" Screws and...

  Important NOTE: This pump is not a standard Wua400 it is a 2 1/2" Suction which would measure about 3 5/8" across the threads by 2" which would measure about 3" across the threads..  DO NOT ORDER TYHIS PUMP UNLESS YOU ARE SURE IT IS CORRECT....

NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II also there are variations as the the wet end union size.. There is a 2" x 2" , 2' x 2 1/2" and 2 1/2" x 2 1/2".. Make sure you know your confirguartion before ordering....

This Kit is a Set of (4) Total Combination of the Two Standard Size 2" Heater or Pump Union Gasket (2) with a 2 1/2" Lip Center to Center and (2) with a 2 5/8" Lip Center To Center. The purpose of this Combo Kit is if you don't know...

This part is a 2.0 Horse Power 10.0 Amp (1) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have the part number 48WUA2002C-II and...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit with Glue found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to...

This Kit is a 2" Pump Union, Slice Valve, Spin Kit To Plumbing Connect Kit found in many Hot Tubs. The Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" coupler to spin it to win it on...

This 5.0 Horse Power 15.0/5.0 Amp (2) Speed 2 1/2" x 2 1/2" 56 Frame Complete Pump is a Intertek LX Brand Pump. These pumps usually have the part number Swim56-15, WUA-500-II, WP-500-II or LP-500-II on the label. Watch the video...

This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 56 Frame found in some Sundance or Jacuzzi Hot Tubs.For the pumps that are used with this bracket click these links: 56Fr Jacuzzi® Sundance Intertek Baseless Pump 2" X 2" 2...

This thru-bolt is 10-32 threads and 10-3/4" Long and has a 5/16" Bolt head.. It fits some Intertek Guangdong LX 56fr motors only.. Motor Brand    Intertek Guangdong LX 56frMotor Parts Type    Thru-BoltPart...

This part is a Base Mounting Bracket, Pump, LX, Sundance, Jacuzzi, 48 Frame found in some Sundance or Jacuzzi Hot Tubs.For the motor that is used with this bracket click this link: Pump, LX, Sundance, Jacuzzi, 48Fr, SD, 2.0HP, 2Spd, 230V, 10.0/3.0A,...