Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A

(No reviews yet) Write a Review
SKU:
HTP0800-39EEEE
Shipping:
Calculated at Checkout
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • This is a properly wired pump with Red as High Speed Black as Low Speed and White as Hot Neutral for this Pump, Aqua-Flo, Maelstrom, 3.0, HP, 230v, 2-spd, 56fr, 2"X 2" Note: There are some rare occasions where Black is High Speed and Red is Low so look at your old pump before removing the wire to be sure. If you didn't make sure when you power up the first time listen for the pump to come on in low speed first if it is high first you have the wires backward which will cause your hot tub to overheat.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • This is a properly wired pump with Red as High Speed Black as Low Speed and White as Hot Neutral for this Pump, Aqua-Flo, Maelstrom, 3.0, HP, 230v, 2-spd, 56fr, 2"X 2" Note: There are some rare occasions where Black is High Speed and Red is Low so look at your old pump before removing the wire to be sure. If you didn't make sure when you power up the first time listen for the pump to come on in low speed first if it is high first you have the wires backward which will cause your hot tub to overheat.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
  • Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A The inlet and outlet measures about 3" across the threads.
MSRP: $532.99
$389.99
— You save $143.00

Description

This pump is a Complete Pump, Aqua-Flo, Maelstrom, 3.0HP, 230v, 56fr, 2"X 2" 1 or 2 Speed 12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage is 12 Amps on High Speed and 3.5 Amps on Low making it a 3.0 Horse Power Pump..

Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.  

 If You need a pump Bleeder Barb Click here: Barb Adapter, 3/8"b x 1/4"mpt, With Silicon Kit Pump Wet End Face fits Aqua-Flo & CMP

Motor Voltage 230v
Speed 2 Speed (2-Spd)
Motor Amperage/Wattage 12.0A/3.5A
Horsepower 3.0hp
Manufacturer AquaFlo/Gecko
Pump Model Maelstrom
Suction Pipe Size 2"
Suction Connection Type Male Buttress Thread (mbt)
Suction Style Center
Discharge Pipe Size 2"
Discharge Connection Type Male Buttress Thread (mbt)
Discharge Style Side
Motor Frame 56 Frame Thru-Bolt
View AllClose

Related Products