Pumps and Related Parts

This part is a Complete Flo-Master FMCP 1.5HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 9.0 Amps on High...

Start Capacitor1-7/16"dia x 2-3/4"hgt

This Pump is a 48Frame 230V 2 Speed with a 2.0 HP Wet End that features a 1 1/2" x 1 1/2" inlet and outlet Wet End that measures about 2 5/16"" across the threads...  High speed Amperage is 8.5 and low speed is 2.8 Amps..   Complete Pump...

You are buying a 3 HP 56 Frame Waterway Executive 2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will be 3...

This item is a 1/2" Air Bleeder Plug with Fine threads that can be found on the Newer style of a Sta-Rite Dura-Jet DJ Series Wet ends only.  If you need the O-ring for this plug only Click Here: Sta-Rite Pump, New Style Drain...

This Pump is a 1 1/2" Side Discharge x 1 1/2" pump which measures about 2 3/8" across the threads edge to edge. This pump is a 115V and we do offer this same pump in a 230V verison ASP34-270-1050 click on the number for the other pump. The...

Low profile button minimizes the risk of false actuationMounting hole 1-5/8"

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

This part is a Pump Face for a Vico Ultima Side Discharge wet end that is 2" which measures about 3" edge to edge across the threads.. The Seal Kits for this pump can be found here: Vico Seals 201 The other parts for this pump can be found here: Ultima...

This part is a Complete FMHP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High Speed on a 230V...

This Waterway 2.0hp Ex2 Pump is 230v, 2-spd, 48fr, 9.0A, 2"x 2" and it is a perfect XP2 or XP2e Replacement.. This is Waterways answer to an Xp2 pump.. Manufacturer Waterway Pump Model EX2 Speed 2 Speed (2-Spd) Motor...