Pumps and Related Parts

This Shaft seal only fits CMP Wet Ends.. Watch the video to determine if your wet end is a CMP, Aqua-Flo or a Guangdong LX before ordering.. For the 3HP Impeller that this seal fits click this link:Impeller, CMP, Universal, Wet End, 3.0hp, 2" x 2" Mpt,...

This Pump is a 48Frame 115V 2 Speed with a 1.5 HP Wet End that features a 1 1/2" x 1 1/2" Side Discharge Wet End that measures about 2 5/16" across the threads...  High speed Amperage is 13.3 and low speed is 4.1 Amps..     Complete...

This part is a Complete 3HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 12.0 Amps on High Speed on a 230V motor and...

This Pump is a 56Frame 230V 2 Speed with a 2.0 HP Wet End that features a 2" x 2" inlet and outlet Wet End that measures about 3" across the threads...  High speed Amperage is 10.0 and low speed is 3.5 Amps.. HTP34-402-5252 Pump,Aqua Flo XP2e,3...

This part is a replacement wear ring found in 48 frame 1 1/2" Flo-Master "FMHP" Series Side Discharge and "FMCP" Center Discharge Spa Pumps.. The ring measures about 1 3/4" inside the wear ring and 2 3/16" at the widest part and about 3/4" tall....

Vico Ultima, Ultra Flo Pump Impeller for a 2HP Motor which would have an Amperage of around 10 Amps on High Speed... Closed face impeller made for the Ultima and Ultra Flo spa pumps by Vico. Rated at 2.0hp, it is used in an Ultima and/or Ultra Flo pump...

This Wear Ring only fits Waterway Executive 1, 2, or 3HP Impellers for a 48 or 56 Frame Pump Wet Ends and measures 1-1/16" thick from front to back... If you have a Waterway Executive 4 or 5 Horsepower Wet End it will require a different wear ring that...

This pump is a Waterway Genesis Generation Energy Efficient Bath Pump 5.5 amps 115 Volts w/Air Switch The Plumbing connections are 1 1/2" on the Pressure and Suction sides which measure about 2 3/8" across the threads.. There are two barbed fittings on...

This part is a Complete 2.5HP Aqua-Flo 2" x 2" ( Which measures about 3" Across the Threads) Side discharge 48 frame wet end for XP2 pumps. This wet end is used with a 48 frame motor that would have about 11.0 Amps on High Speed on a 230V motor and not...

Seal Plate for Vico Ultima pumps. Material Type    PlasticVolute to Seal Plate Mounting Type    4 Bolts 4 NutsVolute to Seal Plate Hole Spacing    4-3/8"Seal Plate to Motor Mounting Type    48...

This Jet Pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 4-5HP 56 frame 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3"...