Pump Wet Ends and Related Parts

You are buying a 5 HP 56 Frame Waterway Executive 2 1/2" X 2" Wet End / Pump complete with Screws, Volute, Impeller, Seal, Face and the Wear Ring. The difference between a 48 or 56 Frame wet end is the spacing of the Motor Thru bolts. The 48 Frame will...

This part is a 48Frame Center Discharge 1 1/2 x 1 1/2" 1HP Waterway Wet End.. The threads would measure about 2 3/8" Edge to Edge.. This wet end would be found on a 115V motor with an Amperage of about 12 Amps or a 230V motor with an Amperage rating of...

This Wet End is a 2" x 2" 3.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 12.0 Amps High speed there are no 115v versions of this wet end..  This side discharge, 2" x 2" mbt which would measure about 3" edge...

This part is a Complete FMHP .75HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Side discharge 48 frame wet end for FMHP pumps. This wet end is used with a 48 frame motor that would have about 7.0 Amps on High Speed on a 230V...

The Waterway center discharge wet end has been discontinued and replaced with the E-Series Center Discharge wet end by the manufacturer. Please be sure which wet end you have as the parts are not interchangeable. The easiest way to identify which wet end...

This is a XP2e 1.5HP Impeller.. The Impeller has a 2 5/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. See the links below for seals, bearing and other parts...

This Wet End is a 2" x 2" 2.0HP 48 or 56 frame Ultimax Vico® that would normally be found an a 230V pump with 10.0 Amps High speed or 16.0 Amps at 115v..  This side discharge, 2" x 2" mbt which would measure about 3" edge to edge on the threads,...

This part is a Complete Verticle Mount Style FMVP 1.0HP Aqua-Flo 1 1/2" x 1 1/2" (Which measures about 2 3/8" Across the Threads) Adjustable Suction Side discharge 48 frame wet end for FMVP pumps only. This wet end is used with a 48 frame motor that...

You are buying a 3 HP 48 or 56 Frame Universal 2" X 2" Wet End / Pump complete with Barb, Silicon, Screws, Volute, Impeller, Seal, Face and the Wear Ring. This Wet End will work for a 2HP , 3HP or 4HP Motor To determine the HP refer to the chart below...

Vico/Balboa Ultima/Ultra Flo Pump ImpellerClosed face impeller made for the Ultima and Ultra Flo spa pumps by Vico/Balboa. Rated at 3/4hp, it is used in an Ultima and/or Ultra Flo pump wet end, and must be installed on a 3/4hp (or greater) thru bolt...

This part is a Complete Flo-Master FMCP 1HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 8.0 Amps on High...