This 4.0 Horse Power Impeller fits 56 Frame Pump Wet Ends manufactured by Intertek LX Brand only. The pump this impeller fits usually have the part number WUA-400, WP-400 or LP-400 on the label. SEE NOTES BELOW... Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 4 13/64"" across the face edge to edge, it measures about 3" from the tip of the front to the tip of the sleeve in the back, it also measures 7/16" from the inside of the vane edge to edge. Some of these impellers have a number on them B358-02 if yours does you must measure the overall width of the impeller to get the correct one. They cast one implore with that number on it and they trim the impeller down to the different horse powers so be sure you do measure edge to edge... NOTE: This Wet End looks a lot like an Aqua-Flo and a CMP Wet End but they do not interchange see the video for how to tell the difference!
Posted by Unknown on Sep 27th 2020
Watched the video describing the various models and determined the correct impeller for my own pump , the photos of the various impellers sealed it when I could see the same numbers cast within as my own, fitted perfectly without any hassle.I am a spare parts man of some 52 years in the trade and whilst appreciating the video I found the presentation needed to cut to the chase. But hey many thanks
Posted by Jim on Oct 30th 2017
Posted by Jim on Oct 25th 2017
Posted by Jim B on Dec 7th 2016
Fast, Friendly, Very Helpful, and Great Videos.They go the extra mile for your business , Great Experience !!!