Hot Tub Parts by Tub Brand

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate...

This part is a PVC Tee, 1"slip x 2"slip x 1"slip.. You can make your connection back to the small side using the below kit..  Connect kit for 1" Soft pipe Click Here..

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max...

Note: When you order this pump you will receive the newest version of the pump which is a baseless 2.5 HP pump and you will receive the base as well.. This will be able to be installed in any...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you...

This filter is 13 1/2" X 4 15/16" and has a female SAE Large Thick Thread that is 2" which would really measure about 2 1/4-2 3/8" ID. This filter is found in Dynasty Bahama Tubs and others. Note:...

This part is a complete Heater, Flo Thru, Balboa M7, 800, 825, 15" x 2", 230v or 115v , 4.0kW, with Sensors..  This heater tube has a stud on the top and bottom make sure yours has them too.. This...

This part is a flow-thru style is used on the 2006-forward Solana TX (triangle spa), RX (round) & SX (square) as well as the 2006-forward Hot Spot models except the Sprint and Dash. 15” length 4...

Heater, FloThru, Watkins TR, 15" x 2", 4.0kW, 230v, Generic Note: This heater does not have a Pressure Switch port or studs for the ground bar..   Housing Configuration    Straight

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. 

This part is a Filter Basket found in some older Cal Spas..