Hot Tub Parts by Tub Brand

  This part is a 3 Terminal Power Block found on some Jacuzzi or Sundance Control pack and board set ups..   Jacuzzi® Spa Terminal Block, Two Position Strip (TB1, All Models Except The J-380/J-385, J310/J-315 And J-230). Also...

This part is a Spaside Control for a Jacuzzi J-300 Series hot tub with an Oval 4-Button LED.. The button configuration is Up-Down-Light-Pump1 Jacuzzi topside LED control panel used on 1 pump J-200 models from 2005-2006 and J-300 models from 2002 to...

This part is a Circuit Board, Balboa, VS501Z, Duplex Digital, 8 Pin Phone Cable w/Circ Option.. As of 2024 new VS501 circuit boards will come with the plug and click female heater adapter installed. It can be removed and you reuse your old wiring or see...

This filter fits Jacuzzi Premium Hot Tubs J-300, J-400 Series. It is 15 1/2" Tall and 6 5/8" Around and Features a 2" SAE which is a Thick Thread and measures a hair less than 2" Inside diameter and measures 2 3/8" to the outside of the threads. There...

This part is a Magic Plastics Drain Valve that mounts through the side wall with a removable front nut to release it from the side panel.. It features a 3/4" Barb and measures about 7" Long overall.. If you need the smaller version of this valve it can...

This part is a Hot Tub Replacement Bottom Drain Inside Wall Fitting with a 3/4" slip fitting on each end which measures about 1" I.D.. This part is on the foam side of the tub and the Fitting screws into this fitting.. You have to stand the hot tub up...

This 1.5HP Impeller fits a Jacuzzi Piranha 8 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 15.6-16.0 Amps on a 115V motor or 7.8-9.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 1.5HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 2.5HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This Part is a  Complete Jacuzzi Piranha, Theramax or Theraflo 48FR 2.0HP Wet End with 8 mounts. It does not come put together you will have to assemble it.. The kit includes the Volute , Face, Impeller, Seal, Face Gasket and...

This part is a 2.0HP Impeller that fits some Piranha Wet Ends found on Sundance, Jacuzzi and other brand Hot Tubs.. Click Here for Seal and Other Part options for this impeller: (8) Mount Parts     Impeller Type Closed...

This part is a Plastic Cage used inside of a Sundance Microfiber Filter..  For the filters and parts that would be used with this part click these links: Sundance Filter, 80sqft, 2"SAE, 2-1/2" Open Hole, 8-1/2" X 14", Used with Roll...