Hot Tub Parts by Tub Brand

This part is a Complete Cal Spa Peanut topside control panel...Button Pattern: Temp, Light, Jets, Option8 Pin 7' phone style connector4-1/2" x 9-3/4" Overall Size   4 Button, LED Display w/7' Cord Overlay Included - Yes Plug Type - 8...

This pump is a Aqua-Flo 1019801 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump..   If you...

This 2.0HP Horse Power 10.0/3.5 Amp (2) Speed 56 Frame Complete Pump is a LX Pump Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 1019801-03 on the label. It is about 7 1/4"" across the face of the pump, it measures...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Vendor Code 3536 LX Pump Wet End.

This part is a Wear Ring that only fits LX Vendor Code 3536 Impellers for a 48 or 56 Frame Pump Wet Ends and measures 13/16" thick from front to back... LX Pumps..  

This Part is a Wet End O-Ring for a 48 or 56 Frame Face Plate for a Vendor Code 3536 Intertek Brand Pump Wet End only.. It is about 6 3/8"" Inside Diameter and about 1/8" Thick..      ...

This pump is a replacement for the Sundance TheraMax II 6500-901 56 frame 2.5HP (1) Speed 230V Side Discharge wet end with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage is 12 Amps on High Speed making it a 2...

This Pump is a Perfect Replacement for a LX 0982601-03 2.5HP 11.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it...

This 2.0HP Horse Power 10.0 Amp (1) Speed 56 Frame Complete Pump is a LX Vendor Code 3536 Intertek LX Brand Pump. These pumps usually have the part number 39577-03 and Wavemaster 8200 on the label. It is about 7 1/4"" across the face of the pump, it...

This Pump is a Perfect Replacement for a LX 1431601-03 Pump it is a 3.0 Horse Power 12.0/3.5 Amp (2) Speed 56 Frame Complete Pump. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure...

This part is an O-Ring that fits a Watkins Wavemaster 7000 Vendor Code 0108 only wet end..   6" ID, 1/8" X Section Square.. The Watkins pump this fits looks like this:  

This part is a Kit that features (2) Seal, (1) Bearing, Seal Tool and Silicon that fit a Watkins, Piranha, Vendor Code 0108, 1.65hp, Wavemaster 7000. To Install you should put silicone sealant on the back of the Metal part and gently push it into place...