Hot Tub Parts by Tub Brand

This part is a Pressure Switch Cable that is 7" long and Universal for use on most SSPA, MSPA, T-MSPA, and some Hydroquip boards..

This part is a Master Spa 8 Button Overlay for Master Spa Legend Series 2005-2012 Topside for a Three Pumps with Light. This Overlay can be used to replace your original Overlay with your brand on it as long as the button configuration works out...

This circulation pump is a 230V Replacement for a Power Right pump found in some Cal Spas.. This Pump is a 2" X 2" Wet End which measures about 3" edge to edge across the threads.. This pump is a 48 frame 230V Side Discharge wet end with a 2" suction...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Jets, Light and to the right is Warm, Mode, Cool. This Overlay has an Adhesive back...

This kit is a New Style Jacuzzi® Premium or Sundance Spa Diverter (3) Piece O-Ring Kit only. This Diverter O-Ring Kit Features (1) Small O-Ring that fit on the Stem sealing the inside of the cap and (1) Medium Size O-Ring that fits on a disc...

This kit is a Repair kit for a 2007+ 4" Wide Capped JACUZZI® Premium J Series 300 and some 400 Model Spa Diverter Valves. This Kit comes with The Cap, Handle, Stem Gate Valve, (2) Small O-Rings and (1) Large O-Ring. The Valve...

This part is a 5 1/8" Master Spa, Down East or Freedom Spa Jet. This Jet is 5 1/8" across the Face Single. It features a single Hole Spinning black nozzle.  

This video is about The Spa Guy showing you how to replace a freeze damaged pump pressure side pump union , slice to the flex pipe where it was freeze damaged... #dynastyspa #dynastyhottub    #sparepair #hottubrepair ...

This Kit is a 45° 2" Pump Union To Plumbing Glue Connect Kit found in many Dynasty Brand Hot Tubs. The Pump Union which measures about 3" Inside the threads glues into a 2" Slip X Slip 45° fitting on one side and then a 2" Slice Valve Glues...

This Kit is a 45° 2" Pump Union To Plumbing Connect Kit found in many Dynasty Brand Hot Tubs. The Pump Union which measures about 3" Inside the threads glues into a 2" Slip X Slip 45° fitting on one side and then a 2" Slice Valve Glues...

This kit is a Set of (2) Air Bleeder barbed plugs,(2) 3/8" x 3/8" Barb couplers, (2) 4" long pieces of 3/8" Tubing and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up...

This kit is a Set of (2) Air Bleeder barbed plugs and Silicon sealer usually used on a Dynasty Hot Tub with Waterway Hot Tub Pump Face to bleed the air off the pump while filling the tub up. I have seen these fittings in many brands just compare the...