Digital Electronic Topside Controls

This relay is No Longer Available.. T90 Style Circuit Board RelayCircuit board mounted, available in various coil voltages. Use to complete simple circuit board repair Action Coil Amps SPST 18 VDC 30amp

Vita Spa OEM circuit board made by Consumer Engineering. This PGI Graphic circuit board is made to replace many older versions. This board has support for up to 3 pumps and a circ pump. Replaces L500 / LC500 / L500A / L700 / L700C / L100 / L200 / R100 /...

Analog topside control panel made by Balboa wuth a single multi function button for pumps and lights as well as a thermostat knob for setting heat. Jacuzzi used this panel on their big box outlet spas such as the H136 and H276. Can also be found on some...

We have (1) Brand New board left after it is sold That its the end of this board.. 2000 Value Replacement Board Replacement boards for 2000 Value systems that utilize a pressure switch. This board is compatible with Duplex Digital and Lite Duplex Digital...

Note: This board is Obsolete but you can use this board: Replacement for this Board.. This Balboa Board is a VS-500 meaning it is a one jet pump board that will run a 12V light and a Circulation Pump also if equipped... This board can be found under all...

Dimensions 3-1/4Óx7Ó This TSC-8/K-8 control panel will work with most MSPA systems, has 8 buttons including a filtration cycle button, and will control dual pumps and an air blower. It has an LCD display and comes with a 10ft cord. This topside also...

This part is a Balboa 8 Button Topside that is called a Balboa E8 with a Molex plug end. This means it is capable of having 8 buttons but you will find this sometimes with 6, 7 or 8 buttons... You will also find a similar size and shape and look topside...

This part includes the replacement box only. You Choose these packs based off of the original part number found on your pack label this part number is any of these: 3-72-7018 , 844259, 0602-221001 , 0602-221015, 0602-221022 or scroll down for more...

The VS300 circuit boards have been discontinued. We now send the VS501Z circuit board which has a few more receptacles but is the same otherwise in fit and programming. This part is a VS300 Board that operates (1) Pump and Light..If your board has this...

This part is a Jumper Strap Set of (2) Kit to connect the heater to the circuit board on Balboa LE and Value Systems. Measures 1-3/8" x 13/16" Circuit Board Application    Balboa Water GroupCircuit Board Model    LE, Value...

3 button Mini Oval topside control panel made by Balboa. This topside is also known as the VL200 and been used industry wide. This 3 button panel has a button for jets, light and temp up/Down. It measures 4-3/8" x 1-5/8" and requires a hole size of...

This kit is no longer available you would choose this kit: Retrofit MODPACK 202 Control Pack, (2) Pump, Blower, Circ Pump, Ozone and 5.5kW, 230v This is a Balboa Retrofit Complete control system with a 15" long heater tube that will run (3) Jet...