Digital Electronic Topside Controls

This part is a 5 Position 50 Amp Terminal Block found in Balboa Lite Leader Packs and some others..  Terminal Type    Terminal BlockTerminal Style    Terminal Block/StripNumber of Connections  ...

No longer available. Please see Balboas new retro-for replacement system here: Control Retrofit Kit Balboa BP7, 1 or 2 Pump/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP500 Topside This is a Balboa Retrofit Complete control system with a 15" long...

This part is a Balboa SUV Board.. There are many part numbers you will find on your old board to cross to this board..One thing that goes wrong with this particular board is the transformer tabs or fingers will break in two causing the board not to power...

Universal Balboa circuit board used to replace many OEM boards that are discontinued. This board will give you all the same functionality as your original. Only differences may be default set temp, default filtration cycle settings etc. Can replace...

This Topside is a Balboa Lite Leader, 2 Button, 6 Conductor, 7ft Cord also found under the name Hydro-Quip, Eco L, Silver-B.. This topside will work in place of the original Balboa numbers: 51499 50821 51705 52223   Topside...

You are purchasing a New Balboa 52295 Non M7 Spa Hot Tub Board. Watch the video for more information including some diagnostic tips.. This board does use a pressure switch.   Board is used with an E7 Topside and can run up to two pumps and...

This part is a Balboa, E7, (7) Button, Topside, Standard Digital, (2) Pump & Blower, Light...This panel replaces all Serial Standard Digital products. It also utilizes the Cat 5 phone type connector. Other Overlays: Overlay Balboa Topside 7 Button...

This part is a Relay, Closed Style, T-90 Type, 12vdc, Coil, 30 AmpCircuit board mounted. Use to complete simple circuit board repair. Action Coil Amps SPST 12 VDC 30amp Coil Voltage Type DC Relay/Contactor Style Relay Pole/Throw Single Pole...

This part is an Overlay, Hydro-Quip Eco 1, Pump 1, Light, Temp Up, Temp Down, Small Oval This small oval label fits the Eco-1 4-button panel  Manufacturer HydroQuip Model Eco-1 # of Buttons 4 Part Type Overlay

The following circuit board(s) are compatible with the above topside: 59-138-1037, 59-138-1046, 59-138-1680, 59-138-1683Overlay part number 58-138-1255

This M-1 54091 circuit board is obsolete. You will need to move to a retro-fit control system. Duplex Digital and Super Digital/M-1 Replacement BoardsThis board requires a 120v power supply and can work with any DuplexDigital. It is found on the Balboa...