Topside Controls (Control Buttons)

No longer available but we have a great replacement model here: Balboa TP700 Base Topside Control Panel, LCD, 11 Button This part is a Topside, Balboa Water Group, TP800, Jet 1, Jet 2, Light, Aux with a Molex plug end. This has 9 buttons.. This...

This part is a Circuit Board Kit, Expander for Balboa VS or EL Systems for the Blower circuit, w/10 Amp Fuse, w/Cables.. Please Note: Circuit boards are a final sale and cannot be returned Circuit Board Control Type Spa Control Circuit Board...

This part is a Balboa Circuit board for an BP2000-G1 system it is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug.. The original board number would have been 56380 this...

The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system, panel,...

This part is a Balboa BP series BP501G3 (Set-Up #1-3), works with TP Series Top Side Panel, Pump1-Blower/Pump2, 4 Pin Molex Connector. This board is used with TP Topsides only..and is commonly paired with the TP600 panel. Original versions of this...

No longer available, but we have a replacement option here: Hydroquip / Gecko ECO-1 Crescent Shaped 4 Button Topside Control Panel 4 Button, LED Display w/10' Cord Overlay Included - Yes Plug Type - 8 Pin JST Plug Keypad Shape -...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa Heater M7 Sensor with a 46" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa 4 Button Topside that is called a VL406U with a Phone or Cat5 plug end.  You will also find a similar size and shape and look topside with a Molex style plug not a Phone style.. This topside control is made for use on Balboa...

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...