Topside Controls (Control Buttons)

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...

This part is a Circuit Board, Jacuzzi (Balboa), R574/R576R1, Value, 6 Pin Phone Cable..   Plug Connection - Phone Style Cable Chip Number - R574/R576R1(x) Circuit Board Application    JacuzziCircuit Board...

This part is a Ground Bar found on many Balboa Brand Spa Hot Tub packs as well as some Gecko SSpa and Mspa packs.

This part is a Heater M7 Sensor with a 31" wire found in Jacuzzi Premium J series 2016 to current.  Note: This sensor does not have the nut and washer on it so it will only work with Jacuzzi Premium hot tubs..   Application Balboa...

This part is a Complete VL-200 or Eco-200 topside that is used on some Balboa 4 button systems..  It features Jet, Temp, Light reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is 72" long.. Topside...

This board fits H716 Duplex Digital circuit board by Balboa. 50920 is a replacement for Jacuzzi Spas.Replaces Jacuzzi Duplex&ndash digital 2-pump w/phone plug Circuit Board Application    JacuzziCircuit Board Model  ...

VL501S Keypad is manufactured for Leisure Bay Spas by Balboa Water Group. Will run 2 Pump Systems. Keypad is Rectangular w/Rounded Sides with LCD Display and measures 13.25" x 2.4". 6 button overlay included (Jets, Jets, Light, Temp+, Temp-). Comes with...

This board fits some Cal Spa circuit board by Balboa8 Pin phone style connectionChip Number:  CS5100DVR1B Chip Number: CS5100R1A / Box Number: 56939    

This board fits some Leisure Bay Balboa Packs with board numbers LB501S, LB501SR1 , LB50XSR1A ...Circuit Board Application    Leisure BayCircuit Board Model    SR1(x)Circuit Board Type    New

This part is a Cal Spa Replacement Version of the Genesis 7000 or 9800 System Retrofit Topside that is replacing the original topside that was scrapped because it had so many issues. Cal Spa replacement for Cal Spa dash board style topside control...