Topside Controls (Control Buttons)

Transformer for Sundance and Jacuzzi based LX circuit boards. This 115/230 volt transformer has a step down voltage of 12 Volts. The purpose of this transformer is to energize the circuit board to power low voltage items like the processor, relay coils,...

This oval topside control is no longer available. We have a replacement option that is a crescent shape rather than oval that takes the same hole size here: Hydroquip / Gecko ECO-1 Crescent Shaped 4 Button Topside Control Panel ECO-1 oval replacement...

Balboa BPBEE Control System with 4.0kW Remote Heater and TP200T Panel. Includes Blackout Plate, Hang Mounts, Topside and Light Wire..  You would reuse your amp cables for pumps and blowers.. If your original control used cords other than Amp Cables...

This part is a Raindance E2 2 Button Overlay for a 4-1/16" x 1-13/16" Rectangle Topside.          The button configuration of Light/Jet and Temp.   Make sure your old topside does not have a raise area for...

This part is a Raindance E4 3 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.          The button configuration of Jet, Temp and Light left to right.     This Overlay can be used to replace your...

Balboa BPBEE Control System with 4.0kW Heater and TP200T Panel. Includes, Blackout Plate, Topside and Light Wire..   This system is compact and will run 1 or 2 Jet pumps or 1 Pump and a Blower and a Light..    You would reuse your amp...

This part is a Cool Nights Balboa 7 Button Overlay for a VL701 Topside for a (2) Pump and a Blower. This Overlay can be used to replace your original Overlay no matter what brand as long as the button configuration works out. On the overlay starting...

This part is a Cool Nights Series Spas Overlay VL260 1 Pump Large Oval 4 Button Balboa. This is an oval overlay is 6 9/16" Long and 1 5/8" wide.  To the Right of the screen follows: Pump 1, Light, Temp Down and Temp Up.    If your...

This part is a Overlay VL260 1 Pump Garden Leisure Large Oval 4 Button Balboa.  This is an oval overlay is 6 9/16" Long and 1 5/8" wide.  To the Right of the screen follows: Pump 1, Light, Temp Down and Temp Up.    If your overlay...

Balboa 4 button oval ML400 LCD topside controll panel with 8 pin molex plug. For use with the EL and GL series of spa packs and circuit boards. Can be used as the main or auxiliary control panel. Requires a 5.5" x 1.5" hole size Topside...

Two jet rectangular overlay sticker for the Balboa ML551 LCD topside control panel. Simple peel and stick application installs in minutes. Button Layout is: Jet 1, Jet 2, Light, Mode, Warm and Cool Manufacturer Balboa Water Group Model ML551 # of...

Rectangular 3 Jet overlay sticker for the Balboa ML551 topside control panel. Simple peel and stick application takes minutes to install. Can be used to replace overlays by various manufacturers. Button Layout is: Jet 1, Jet 2, Jet 3, Light, Mode, Warm...