Topside Controls (Control Buttons)

As of 2024 Balboa has switched the VS501SZ board to the VS510SZ model which is what we send. Also new circuit boards will come with the plug and click female heater adapter installed. It can be removed and you reuse your old wiring or install the male...

This part is a Complete VL-200 or Eco-200 topside that is used on some Balboa 4 button systems..  It features Jet, Light, Warm, Cool reading left to right.. It has an 8 pin Cat 5 Phone Style plug and a cord that is 72" long.. Please Note:...

This part is a New Style 3-Lug Terminal Block found on many Balboa brand spa and hot tub boards. The original factory blocks were a cream/white color, but the new ones we now have in stock are green. They interchange perfectly and work exactly the same...

In limited supply, get one while you can!! This part is a Balboa Circuit board for an EL2000 Mach 2 system it is a new board and can be found under several different numbers.. The compatible topside would be a MOLEX system plug not a phone plug.. This...

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair #spaguy...

This part is a La Spa Gecko Topside Control Panel K-72 Overlay Only 5 or 6  Button Skewed Style for 2 Pump, and a Light.  or (2) Pumps, Blower and Light.. Note: The 5 button version is no longer available but we still have the 6 button...

This part is a Master Spa 8 Button Overlay for Master Spa Legend Series 2005-2012 Topside for a Three Pumps with Light. This Overlay can be used to replace your original Overlay with your brand on it as long as the button configuration works out...

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not have glass but used ceramic to dissipate heat. You...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Jets, Light and to the right is Warm, Mode, Cool. This Overlay has an Adhesive back...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components.. 6 position terminal block 5-3/16" overall length.

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater   This part is a single Jumper Strap to connect the heater to the circuit board on Balboa B2DG and B240 Systems. Requires two per...

This circuit board is obsolete. We have a compatible retro-fit option available here: Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP600 Topside This board is a replacement board for Circuit Board, Jumpking...