Topside Controls (Control Buttons)

In this video The Spa Guy tells you the basics about diagnosing and replacing a M7 sensor on a Balboa Board.  Click this link for the m7 sensors on this site: M7 Sensor #sparepair #hottubrepair...

This part is a La Spa Gecko Topside Control Panel K-72 Overlay Only 5 or 6  Button Skewed Style for 2 Pump, and a Light.  or (2) Pumps, Blower and

This part is a Master Spa 8 Button Overlay for Master Spa Legend Series 2005-2012 Topside for a Three Pumps with Light.

This Item is a Board Fuse .05Amp Slo Blo MDA Style Ceramic Fuse that measures 1 1/8" Long x 1/4" Wide and is used on some Hot Tub or Pool Boards. This is a smaller automotive style fuse that does not...

This part is a Balboa 6 Button Overlay for a VL620S or VL600 Topside with Two Pumps and Light System. On the overlay starting at the left of the readout it reads Jets, Jets, Light and to the right is...

This part is a Terminal Block 6 Position 40A 115 or 230V.. that fits Balboa Duplex Digital and Super Digital Board System with (6) Tabs to connect the board to the components..

This part is obsolete..but we have a better option here: Jumper Wire, Heater Element, 10 gauge x 4", Board to Heater  

This circuit board is obsolete. We have a compatible retro-fit option available here: Control Retrofit Kit Balboa BP7, 2 Pump, Pump 3/Blower ,Ozone ,Light, 4.0kW, 115v/230v, with TP600 Topside<

This part is a Balboa E4 4 Button Overlay for a 6-3/8" x 2-1/4" Rectangle Topside.      &

This part is a Control Box Cover that fits Balboa VS or GS Series Control boxes only..

Gecko has discontinued this version of the in.yj systems. Here is the new version that now includes a different topside and a wifi module: Gecko In.Yj Retro-Fit Control System w/ 4.0 KW Heater With...

This part is for a Set of (2) Standard Balboa Board Replacement Repair Relay made by Zettler. This Relay is the standard relay found on most Balboa Boards but it has double tabs on it so you can add...