Pumps and Related Parts

1.0 Hp single speed thru-bolt pump motor in the 48Y frame style. This motor runs at 230 Volts and draws 6.0 amps. Motor Type Spa Motor Amperage 6.0A Voltage 230v Frame Type 48Y Speed 1 Speed (1-Spd) Horsepower 1.0hp Total Horsepower 1...

This part is a Complete Flo-Master CMCP 1/15HP Aqua-Flo 1-1/2" x 1-1/2" ( Which measures about 2 3/8" Across the Threads) Center discharge 48 frame wet end for 48FR pumps. This wet end is used with a 48 frame motor that would have about 0.6 Amps on a...

This Kit is a Set of 2 NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2 1/2" center to center... Do not buy this O-Ring...

This part is a LX Pump Union O-Ring 11/64" Thick 2 5/8" Center to Center For The World's Finest 2" Pump Union. O-ring Only The O-Ring is 2 5/8" Center to Center across and 11/64" Thick where the standard O-Ring is about 1/8" Thick This fits LX Pump...

THERA-MAX 2.5HP 2 SPEED BASELESS PUMP FOR JACUZZI AND SUNDANCE SPAS Only   This pump is a Jacuzzi / Sundance, Baseless, TheraMax, 48FR, 2.5HP, 2SP, 230V that measures about 3" across the threads.. The amperage is 10.0-12.0 Amps on high speed and 3...

This Kit is a 2" Sweep Pump Union To Plumbing Connect Kit found in many Hot Tubs.   The 2" Sweep Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" Street X Slip 90° fitting on...

This Kit is a 2" Sweep Pump Union To Plumbing Connect Kit found in many Hot Tubs.   The 2" Sweep Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" Street X Slip 90° fitting on...

This is a 2.5HP Impeller with a 2 1/8" Eye width for a Waterway 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Waterway EX2 Wet End which is very rare and odd. I would...

This part is a Wet End, Circulation, TheraMax II, 1/15hp, 230v, 1-1/2" Side Discharge, Sundance , Jacuzzi, 02410512-2 or 6500-907.  The Model# on the pump this would fit would be 02410512-2 or 6500-907.. Note: There are variations to pumps with the...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 39578-03, 0982601-03 or 37066-03. This is a LX Brand Replacement Wet End Pump with a  2" X 2" 2.5HP 230V Vendor Code 3536 only.   It is about 7 1/4"" across the face of the...

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top...

This part is a Complete Wet End for a Sundance, TheraMax II, 6500-901 or 6500-902, 2.5HP, 230v, 56fr, 2"X 2" 11-12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage on the motore this would be on is about12...