Pumps and Related Parts

This Complete Wet End fits a 39577-03 Vendor Code 3536 10 Amp 56 Frame Pump 77712.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16"...

  Important NOTE: This pump is not a standard Wua400 it is a 2 1/2" Suction which would measure about 3 5/8" across the threads by 2" which would measure about 3" across the threads..  DO NOT ORDER TYHIS PUMP UNLESS YOU ARE SURE IT IS CORRECT....

The WUA400-2/6 is on an extended back order and we don't have an ETA for its arrival. We recommend using the standard WUA400-II model. The difference between the two is the low speed amps are 3.4 amps higher and have a slighly higher rpm on the...

Read This Note First!! // NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® &...

// Read This Note First!! NOTE: This Seal will NOT Fit Sundance® or Jacuzzi® Tubs with a LX Intertek Wet End for those parts click here Jacuzzi® & Sundance® LX Parts This Seal Kit that includes the...

This Item is a Wear Ring, fits LX 1431501-03 Wet End Only. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for the 3536 Version. NOTE: Do Not purchase this for any other brand except...

This Item is a seal for the LX Hot Tub pump with the part number 1431501-03. It may have a Vendor Code 3536 on the LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version. NOTE: Do Not purchase this for any...

This Item is a Wet End for a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. It may have a Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 1431501-03 on the label for a 3536 Version.  NOTE:...

This part is a Wet End for Circulation Pump, LX 48WTC, 1/8HP, 115 or 230V, 1.6 or 0.8A, 1-1/2"MBT, Side Discharge.. This pump is a 48 frame Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures about 2 3/8" edge to...

This is a 4HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 4.0HP Motor would be about 14.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo XP2 or XP2e...

This is a 2.5HP Seal and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 2.5HP Motor would be about 11.0 Amps on high speed at 230V. Note: The three things you need to know to get the correct Aqua-Flo XP2 or XP2e...

This 1.5 Horse Power 48 Frame Pump Wet End fits LX Jacuzzi or Sundance Brand 6500-090 , 6500-345 , 6500-357 , 6500-845 Pump Motors only that would be about 9.0 Amps at 230V or 14.0 Amps at 115v... These pumps usually have the part number WUA-150,...