Pumps and Related Parts

This Kit is a 2" Sweep Pump Union To Plumbing Connect Kit found in many Hot Tubs.   The 2" Sweep Pump Union which measures about 3" Inside the threads receives a 2"street X 2" Slip Slice Valve then you glue the 2" Street X Slip 90° fitting on...

This is a 2.5HP Impeller with a 2 1/8" Eye width for a Waterway 48 or 56 Frame Wet End 2.5HP Motor that is about 11.0 Amps on High Speed. This Impeller fits between the Face and the Volute of an Waterway EX2 Wet End which is very rare and odd. I would...

This part is a Wet End, Circulation, TheraMax II, 1/15hp, 230v, 1-1/2" Side Discharge, Sundance , Jacuzzi, 02410512-2 or 6500-907.  The Model# on the pump this would fit would be 02410512-2 or 6500-907.. This pump is a 48 frame 230V Side Discharge...

This part is a Complete Wet End for Vendor Code 3536 with pump numbers 39578-03, 0982601-03 or 37066-03. This is a LX Brand Replacement Wet End Pump with a  2" X 2" 2.5HP 230V Vendor Code 3536 only.   It is about 7 1/4"" across the face of the...

This Replacement LX Wet End for 0974101-03 or 0974001-03 1.5HP 48Fr LX Pump 2" X 2" only that would be about 8.0 Amps at 230V Vendor Code 3536..  It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top...

This part is a Complete Wet End for a Sundance, TheraMax II, 6500-901 or 6500-902, 2.5HP, 230v, 56fr, 2"X 2" 11-12A with a 2" suction side and 2" pressure side which measures about 3" edge to edge. The amperage on the motore this would be on is about12...

Note: When you order this pump you will receive the newest version of the pump which is a baseless and you will receive the base as well.. This will be able to be installed in any position but you will have to install the base which may not line up with...

This Part is a Complete Wet End, 77773, 36746, 72194, 72197, 2.0HP, 230v, 48 frame, 2" x 2", 8.5A, Vendor Code 4081   This Wet End is a 48Frame 2" x 2" inlet and outlet Wet End that measures about 3" across the threads..   Watkins Does Not...

This Complete Wet End fits a 39577-03 Vendor Code 3536 10 Amp 56 Frame Pump 77712.. It is about 7 1/4"" across the face of the pump, it measures about 7 3/8" from the bottom to the top of the pressure side of the volute, it also measures 4 13/16"...

  Important NOTE: This pump is not a standard Wua400 it is a 2 1/2" Suction which would measure about 3 5/8" across the threads by 2" which would measure about 3" across the threads..  DO NOT ORDER TYHIS PUMP UNLESS YOU ARE SURE IT IS CORRECT....

NOTE: LOW SPEED ON THIS PUMP IS NOT THE SAME AS PART # 56WUA400-II also there are variations as the the wet end union size.. There is a 2" x 2" , 2' x 2 1/2" and 2 1/2" x 2 1/2".. Make sure you know your confirguartion before ordering....

Read This Note First!! // NOTE: This Part will Fit Sundance® or Jacuzzi® Tubs with a Guangdong LX Wet End if you replace the entire Wet End for internal parts of the wet end you already have click here Jacuzzi® &...