Pumps and Related Parts

This item is a 1/2" Air Bleeder Plug with Fine threads that can be found on the Newer style of a Sta-Rite Dura-Jet DJ Series Wet ends only.  If you need the O-ring for this plug only Click Here: 

This O-Ring is used on a Sta-Rite Pump, New Style Drain Plug, O-Ring, 1/2" ID, 3/32" Cross Section  Fits this style of plug only.. 

This Seal Set is used ONLY in Seal SWIM56-15 or WUA 500 Wet Ends. It is 1 39/64" Across the back of the Spring Seal part that goes into the volute or wetend back and the Ceramic & Rubber part that...

This part is a 7 3/8" ID 

This part is a Face Plate for a WUA500 or SWIM56-

This Part is a 48 or 56 Frame Face Plate for a Jacuzzi or Sundance Intertek LX Brand Pump Wet End only this face plate uses fine

This part is a 2.0 Horse Power 10.0 Amp (1) Speed 48 Frame Complete Baseless Bracketless Pump found in some Sundance or Jacuzzi Hot Tubs. These pumps usually have

This Motor Thur-Bolts 8/32 thread and is 9 3/4" long with a 1/4" Bolt head and fits 48fr motors only..The Thread length is minimum 1" on the shaft..  

<

This Listing is for a Waterway Executive 56fr 2 Speed 230V 1 HP 2 1/2" X 2" Pump. Your sticker may say 2HP but based on the chart it is really a 1HP at 8 Amps. This Pump is a 2 1/2" x 2" which is...

This part is found on a FMVP Vertical Circle Pump and is the O-Ring Between 4 Bolt Suction Plate and Face 2-3/8" ID 1/8"..

This Item is a 1.0 Horse Power 9.0 Amp (1) Speed 48 Frame Complete 1 1/2" Side Discharge Pump. These pumps usually have the part number WBC150 on the label for an Intertek Pump.