Pumps and Related Parts

This Vendor Code 3536 2.5 Horse Power Impeller, Seal, Silicon & Seal Installation Tool that fits a 56 Frame Pump Wet Ends manufactured by Intertek with numbers 39578-03, 37066-03 or 0982601-03 only.  See NOTES Below... Watch the video...

This part is a Pump Bleeder Barb fit some Watkins Wavemaster LX Pumps and others.. It is 1/2" Barb x 1/4"Mpt and is used with an unusually large bleeder line.. The line is 1/2" Inside Diameter not 3/8" Inside Diameter like most bleeder lines.. This part...

This pump is a Aqua-Flo, Pump, Vendor Code 4081, 0982601, 2.5HP, 230v,2-spd, 48frame    This pump is also the closest replacement for the Obsolete 0982601-02 Power Right Pump..  NOTE about these Replacement Pumps: Watkins Does Not...

This 2.5HP Impeller fits a Jacuzzi Piranha 4 Stand Wet End Fixed Bracket Motor only and would be found on a motor that is about 11.0 Amps on a 230V motor..... It can be found under the Name Thera-Max or Thera-Flo on Sundance tubs and is also on Jacuzzi...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.0HP called 3.6, 1 Speed, 230V that measures about 3" across the threads with the output positioned at 9 o'clock.. The amperage is about 8.7 Amps on high speed.. Note: This Pump will Only Work in...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.0HP called 3.6, 2SP, 230V that measures about 3" across the threads.. The amperage is about 8.6 Amps on high speed and 3.4 Amps on low speed and this pump will work as a one or speed pump....

This 2.0 Horse Power 230V 10.0/3.0 Amp (2) Speed 48 Frame Complete Pump is a Lingxiao LX Brand Pump. These pumps usually have the part number 48WUA2002C-II on the label for a Watkins Version. Watch the video for instruction on how to...

This part is a Heater for a Bath or Garden Tub.. H-Q InLine, 115v, 1.5kW, 3ft, Replaces Versi-Heat with Pure Heat... This heater can be used with 2" which would measure about 2 3/8" OD or 1 1/2" which would measure about 1 7/8" OD pipe....

This part is a Bath Style (1) Speed Jacuzzi J-Pump, 115v, J Pump Style Fitting, 7.5A, w/Air Switch...   Note: This pump is equipped with an air switch. If the motor does not start upon plugging it in, the switch may be in the off position...

This part is a Used cover Face Plate 56 Frame A.O. Smith Motor.... Note: This is a used part because there are no new offered without the complete motor and the condition will vary although we will not send you a cover that is not useable..

This pump is an Aqua-Flo XP2 48frame 230V 2 Speed with a 2" x 2" Wet End  that measures about 3" across the threads.. The amperage is 8.5 Amps on high speed and 2.8 Amps on low speed and this pump will work as a one or speed pump.. If you need...

This pump is a Pump, Jacuzzi / Sundance, TheraFlo, 48FR, 2.5HP, 1SP, 230V that measures about 3" across the threads.. The amperage is about 11.0 Amps on high speed and 3.5 Amps on low speed and this pump will work as a one or two speed pump.. Note: This...