Pumps and Related Parts

This Part is an Old Style Barbed Bleeder Plug that fits some 48 or 56 Frame WUA Intertek LX Brand Pump Wet Ends that use coarse thread bleeder plugs be sure to compare your old plugs to the pictures.. Watch the video for instruction on...

This Part is a Fine Thread Bleeder Plug for a 48 or 56 Frame Newer Style Face Plate on an Intertek LX Brand Pump Wet End. Be sure to compare your old plugs to the pictures.. NOTE: This Wet End's parts looks a lot like an Aqua-Flo and a CMP Wet End...

This Part is an Old Style Plug for a coarse Face Plate for an Intertek LX Brand Pump Wet End only this face plate uses coarse thread bleeder plugs be sure to compare your old plugs to the pictures..  Note: This part Fits...

This Part is a Wet End O-Ring for a 40 or 56 Frame Face Plate for a Intertek LX Brand Pump Wet End only.. Watch the video for instruction on how to install this part and also how to determine if this is the correct part. It is about 6 3/8""...

This part is Obsolete but we occasionally have some takes offs from new wet ends that have been damaged.. The face will not be damaged they just come off of wet ends that have had shipping damage. If you do not see any here for sale meaning you cannot...

In this video The Spa Guy shows you How To Read and understand a Hot Tub Pump Motor Wiring Schematic and wire your Hot Tub Pump motor.. Most Hot Tub Pump Motors do not come with a wire so this teaches you how to put the wire on the new motor.....

This video is about The Spa Guy teaching you How To Turn a Pump Wet End to the Direction You Need it to be in to fit your hot tub... Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save Save

This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version.  It is about 7 1/4"" across the face of the pump,...

This is a 1.5HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. Note: The three things you need to...

This is a 1.5HP Seal, (1) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.5HP Motor would be about 9.0 Amps on high speed at 230V or 14.0 Amps on High at 115V. Note: The three things you need to...

This is a 1.65HP Seal Kit & Impeller for Watkins, Vendor # 4081, Wavemaster Pumps. This Impeller fits between the Face and the Volute of a the Wet End found on some Watkins HotSpring Caldera pumps with Vendor Code 4081 with Numbers 06115734-1,...

  This is a 1.0HP Seal, (2) Bearing and Impeller Kit.. The Impeller has a 2 1/8" Eye width for an Aqua-Flo 48 or 56 Frame Wet End 1.0HP Motor would be about 8.0 Amps on high speed at 230V or 12.0 Amps on High at 115V. Note: The three things you...