Pumps and Related Parts

This part is a Starter Capacitor that fits many 115V and 230V Pump Motors. When diagnosing pumps for a no start condition where it is powered up but just hums you can hand spin start the motor by taking a screw driver to the shaft in the back and...

This Part is an 48 Frame 2.0HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 16 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This Part is an 48 Frame 1.5HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 14 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This Part is an 48 Frame 1.0HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 12 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This Part is an 48 Frame 3/4HP TMCP Aqua-Flo Wet End for a Garden Tub Bath Pump that has a voltage of 115V and an Amperage of about 10-11 Amps..  Note: The outside measurement of the threads on this wet end are about 2 3/8" meaning the inside...

This part is a set of (2) Bearings that fit most motors that are used in hot tubs, this bearing is 17MM ID. Some of the motors this fits are A.O.Smith/Regal Beloit, Century/Regal Beloit, Franklin Electric, General Electric NOTE: Installing bearings...

This pump is a Jacuzzi J-Pump, .75 HP, 48 frame, 115V, Single Speed with a J Pump Style Wet End  that measures about 2 15/16" across the threads on both the suction and pressure side connections..  Note: This Pump will Only Work in Jacuzzi J...

This part is a 12" Piece of 1/2" Flex Pipe used with 1/2" Manifolds, Jet Bodies and other fittings......       740016011378,DW-17ST R , DW-17ST-ZD,89-555-1105,1.062",hose clamp,pipe,pipe clamp,clamp,roto,roto...

You are Purchasing a 6" Piece of 1/2" Flex Pipe used with 1/2" Manifolds, Jet Bodies and other fittings...... The list on this part is $12.99.   We have done a lot of extra work with videos and pictures to prevent you from choosing...

This part is a 12" Piece of 3/4" Flex Pipe used with 3/4" Manifolds, Jet Bodies and other fittings..       740016011378,DW-17ST R , DW-17ST-ZD,89-555-1105,1.062",hose clamp,pipe,pipe clamp,clamp,roto,roto...

You are Purchasing a 6" Piece of 3/4" Flex Pipe used with 3/4" Manifolds, Jet Bodies and other fittings...... The list on this part is $12.99.   We have done a lot of extra work with videos and pictures to prevent you from choosing...

This part is an Add On Air Bleeder kit featuring a Mountable Bleeder Fitting with a removable plug, a 1/4" Mpt X 3/8" Barb plug, (2) Clamps for each end of the tubing and 36" of Clear 3/8" ID and Silicon sealer..   This kit can be added if you...