Cal Spa Hot Tub Parts

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V or 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which...

This part is a Spa Diverter (3) Piece O-Ring Kit only. This Diverter O-Ring Kit Features (2) Small O-Rings that fit on the Stem sealing the inside of the cap and (1) Large O-Ring that seals the outside of the cap and it fits many different brands The...

This item is a (6) Way Barbed Coupling used to couple 3/4" main hoses and 3/8" ID hose together. 3/4 Inch Barb X 3/4 Inch Barb through and (3) tees Barb Coupling 3/8" barb and 3/8" barb... This part is used on pump bleeder systems many time where the...

You are Buying a Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by simply adding silicon...

This Kit is a Silicone Kit & Lo-Profile Drain Assembly, 3/4" Barb, Black, 1-15/16" Face Width Replacement Bottom Drain Fitting Kit found on many brands of Hot Tubs. Remove the cracked inside the floor top Fitting and replace with this one by simply...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board bolts.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board Application    Balboa Water GroupManufacturers Part...

This Part is a  Cal Spa 1" Spa Hot Tub Complete Air Valve "Teardrop Style". The Valve Tear Drop Cap Width is approx. 3" and the Hole size in the tube would be 1 5/8" with a 1" slip plumbing commention on the bottom..   For help please see our...

This topside is no longer available this would be the closest replacement: Cal Spa, Peanut, 6000, 6100, 4 Button, Topside, Phone Plug, Temp, Light, Jet, Option This part is a Complete Cal Spa Mini Dash 2010 topside control panel...Button Pattern: Temp,...

You are buying a Cal Spa Genesis 7000 or 9800 System Retrofit Topside that is replacing the original topside that was scrapped because it had so many issues. Generic replacement for Cal Spa dash board style topside control panel.  Replaces...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a Cal Spa 1" Spa Hot Tub Air Valve " Cap Only". The Valve Tear Drop Cap Width is approx. 3" and the Hole in the Cap is approx. 1/4". Compare the measurements to be sure this is correct. NOTE: This listing is for the Cap only all other...

Power-Right Pump Impeller Note: This Impeller is Obsolete so I have only (1) left.. This is the Reverse Side Closed face impeller made for the Power-Right PR420-5R Dually spa pumps. Seals & kits for this Impeller can be found here: 201...