This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.
This pump is a 48 frame 115V or 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures about 2 3/8" edge to edge.
Note: You need to be sure of your voltage by checking one of two things. Either the label on the pump which will say either 115V or 230V or you can look to see where the white wire from the pump is located in the pack if you can't see the label. If the white wire is on the red leg or #2 leg the pump is 230V if it is on the Neutral or the White AC leg. Always turn the breaker to the hot tub off before doing any of these checks.
|Complete Pump Type||Circulation Pump|
|Speed||1 Speed (1-Spd)|
|Motor Voltage||115v or 230V
|Drain Plug Location||3,6,9 o`clock|
|Pump to Motor Foot Types||15|
|Suction Connection (Physical Dimension)||1-7/8" id, 2-7/16" od|
|Suction Connection Type||Female Pipe Thread (fpt), Male Buttress Thread (mbt)|
|Suction Pipe Size||1-1/2" which measures 2 3/8" edge to edge|
|Discharge Connection (Physical Dimension)||2-7/16" od|
|Discharge Connection Type||Male Buttress Thread (mbt)|
|Discharge Pipe Size||1-1/2" which measures 2 3/8" edge to edge|
|Motor Frame||48 Frame Thru-Bolt|
|Motor Amperage/Wattage||.08A or 1.6A|
This video is an example of this pump being use in place of another brand:
This product hasn't received any reviews yet. Be the first to review this product!