Cal Spa Hot Tub Parts

This part is a 3.0HP Power-Right Pump Impeller that would be found on a motor with about 12.0 Amps at 230V.. Closed face impeller made for the Power-Right 3.0ohp/6.0thp spa pump. Rated at 3.0hp, it is used in the Power-Right 9089X, 9094X, 9121X, PRC504...

This part is a Vacuum Switch like you will find on some  Cal Spas in the suction side of the pump. Specs V4001P-DX Replacement, 21A, 1/8"mpt. For a switch like the original click this link: PresAirTrol Style Vacuum Switch This is a normally open...

This Part is a Surface Mount Style HI LIMIT: Single Pole Single Throw THERMAL FUSE Auto Reset (With NO CAPILLARY)This Hi Limit Surface mount surface mounts to the heater in a spot where it can read what the actual water temperature is flowing through the...

This is a 230V Waterway Tiny Might Circulation Pump that is 1" x 1" which measures about 1 7/8" to the outside of the threads. It is high in efficiency and low on power use. Tiny Might packs a not-so-tiny punch. The Tiny Might offers you a great low flow...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 115V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

This circulation pump is found from the factory in many hot tubs and will be an easy installation for people who are handy.   This pump is a 48 frame 230V Side Discharge wet end with a 1 1/2" suction side and 1 1/2" pressure side which measures...

This Filter Cartridge fits Some New Cal Spa and Marquis Spas. It is 12 1/2" Tall x 5 3/16" Wide with 2" Mpt Threads which is a think thread that measures about 2 3/8" outside diameter. The MPT Threads measure between 2 1/4 and 2 3/8" edge to edge. It...

This part is a 25Amp Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections. Watch the Video for How To Information on Pressure Switches. This Switch will fit Balboa,...

This filter is this most popular size and fits 70% of all tubs it is a 25 Square Foot Filter Cartridge that is 4-15/16" Outside Diameter x 13-5/16" in Length. It has a hole in the top and the bottom that are 2 1/8".   For the 50sqft version of...

This part is a Gasket Heater Union Mo-Flo, 2" ID x 2-3/4" OD Cal Spa with a 2-5/8" Center to Center Small Lip.. The Lip is about 2-5/8" Center to Center but is really thin and tiny meaning the other style gasket with a thick 2-5/8" lip will not work....

This part is a 2" Slip X 2" Threaded Pump Union with Gasket or O-ring that matches Union. The Union receives a 2" pipe or fitting on one side and then Screws to a 2" Wetend(Pump) Threaded Part on the other...

 You are buying a Tecmark 1 Amp Pressure Switch that features 1/8th" MPT Standard Threads and 2 Spade connectors for attaching the 2 wire connections. Watch the Video for How To Information on Pressure Switches. This Universal Switch fits Balboa,...