Hot Tub Parts by Tub Brand

This part is a Viking or Destiny River Topside, Balboa, E4 Oval, Jets, Jets, Temp, Light works for 1 or 2 Pump Systems 7' Long Cord. It has an 8 pin Cat 5 Phone Style plug and a cord that is 84" long to work with some Viking Brand hot tubs where...

This part is a Clip that hold the  Jacuzzi Spa Trap, Mesh Skimmer Bag into place inside the filter housing. Fits most J-300 Series, 2002 and newer and here is a link to the filter for this tub too Jacuzzi Premium 2002+ Filter Skimmer Bag has 6...

This is a 5-1/4" FLUIDIX-INTELLI-JET WITH ESCUTCHEON for Sundance Hot Tubs.. This jet is very specific to Sundance brand hot tubs only do not order for another brand.. Please Look closely at the pictures with measurements to be sure before ordering....

This Filter is a 40 Square Foot Filter Cartridge for a Dynasty Hot Tub that is 6" Outside Diameter x 8 1/4" in Length. It has a 1 1/2" SAE Threaded Fitting which is a Thick Thread that measures about 2" outside diameter of the threads. SAE Threads are...

NOTE: This part is obsolete but we do have an alternative camp that will work but it is Dark Graphite Gray. If you order this Teardrop cap you will get the 6 spoke cap instead.. This part is a Cal Spa 1" Spa Hot Tub Air...

Power-Right Pump Impeller Note: This Impeller is Obsolete so I have only (1) left.. This is the Reverse Side Closed face impeller made for the Power-Right PR420-5R Dually spa pumps. Seals & kits for this Impeller can be found here: 201...

Power-Right Pump Impeller Note: This Impeller is Obsolete so I have very few left.. Closed face impeller made for the Power-Right PR420-5F spa pumps. Seals & kits for this Impeller can be found here: 201 Seals Impeller Type    Closed...

This part is a 3 1/4" JACUZZI® Premium Mini Power Pro FX Jet Kit for 2004+ hot tubs..     Jacuzzi Spa Mini PowerPro FX Jet Without Stainless Steel Escutcheon. Jet Face Measures 3 1/4 Inches Across. This Jet Was Introduced In...

You are buying a Cal Spa Hot Tub Silver Neck Pillow for Some Cal Spa Hot Tubs. It is 11" long Edge to Edge, 5 1/8" Wide on the edge top to bottom and it has 2 pins that are 9" between the pins . It is silver in color and has bumps.   We...

This part is a Cal Spa Hot Tub Silver Wing Pillow found over neck jets for Some Cal Spa Hot Tubs. It is 16 3/8" long wing tip to tip, 3" Wide in the center it has 2 pins that are 8 1/2" between the pins . It is silver in color and has bumps...

You are buying a Cal Spa Hot Tub Dark Gray Neck Pillow for Some Cal Spa Hot Tubs that usually has 1481 cast into the back of the pillow. It is 11 1/8" long Edge to Edge, 5" Wide on the edge top to bottom and it has 2 pins that are 9" between the...

This Waterfall or Neck Jet Control Stem is Used in Waterway Top Access 100% shut-off valves 1". This valve has a piece of rubber on the backside to complete the seal..  Click on the links below for related part:  Spa Hot Tub 1" Waterfall or...