Hot Tub Parts by Tub Brand

This video is about The Spa Guy showing How To Remove a Heater Element where the nuts are spinning in the tube and will not turn off...... it is a similar process on all brands... Save

This Kit consists of 18" of 1" Inside Diameter Clear Tubing, (4) Clamps and a 4oz Bottle of Hot Blue Glue.. This Kit is used to convert your Hot Tub from the more expensive less reliable 3/4" Laing Circulation Pump to The less expensive more reliable...

This Kit consists of 18" of 1" Inside Diameter Clear Tubing and (4) Clamps.. This Kit is used to convert your Hot Tub from the more expensive less reliable 3/4" Laing Circulation Pump to The less expensive more reliable Grundfos.. The extra length of the...

You are buying a 4.0KW Heater Complete Assembly includes Tube, Element, Metal Case and connecting wires. This unit features a high limit holding tab and a port for the pressure switchThis Heater Fits Cal Spa Hot Tubs and Is a Perfect replacement for...

This Part is a 5.5KW Titanium Heater Element with (2) Heater Union Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa...

This part is a 4.0KW Titanium Heater Element with (2) Gaskets and a 1/2Oz Tube of Special Hot Tub Formulated Silicon Sealer to Seal the Threads. This Heater Element features the bend in the back of the element needed to fit the Balboa M-7...

You are Buying a 3 1/8" Gray Dynasty Starfish Shaped Diverter Knob with Metal Logo in Center only with the number DY6023530M inside the knob. This Diverter Knob Handle Slides on the Diverter Valve Stem is used to operate the ON/OFF...

You are Buying a 3" Gray Dynasty Starfish Shaped Diverter Knob with Metal Logo in Center only. This Diverter Knob Handle Slides on the Diverter Valve Stem is used to operate the Diverter Valve and is for Dynasty Spas only. The list on...

This Kit Fits Watkins, Vendor #4081, Wavemaster Pumps. This Kit Features (1) Bearing, Seal Tool, Silicone & (1) Seal for Vendor Code #4081 Pumps on Hotspring Watkins Hot Tubs.. Note: Watkins used 5 different Brands of Wet Ends under the Wavemaster...

This part is a Master Spa Generic 3 Button Overlay for a mas260 Topside for a Single Pump with  Light. This Overlay can be used to replace your original Overlay with your brand on it as long as the button configuration works out. On the overlay...

You are buying a Discontinued Hot Tub Pillow Set of (3) that fits some Infinity , Raindance , Four Winds or  Streamline Spas. It is Approx 10" long 4 3/4" Wide it has 2 snap tabs on the back that are approximately 5" apart and comes...

This part is a Hot Tub Pillow that fits some Infinity , Raindance, Four Winds or  Streamline Spas. it is Approx 10" long 4 3/4" Wide it has 2 snap tabs on the back that are approximately 5" apart and comes with 2 cups to upgrade if...