Hot Tub Parts by Tub Brand

This part is a Complete Jet Body & Jet for a 7 5/8" Master Spa, Down East or Freedom Spa Jet. This Jet is 7 1/2" to 7 5/8" across the Face it depends on how you measure it. It features 15 black nozzles.    The plumbing...

This part is a Set of Jumper Wires that would go from a standard heater element Electrode Tab to the board bolts.. These can be used on 4.0kw to 5.5kw elements.. Circuit Board Application    Balboa Water GroupManufacturers Part...

This Part is a  Cal Spa 1" Spa Hot Tub Complete Air Valve "Teardrop Style". The Valve Tear Drop Cap Width is approx. 3" and the Hole size in the tube would be 1 5/8" with a 1" slip plumbing commention on the bottom..   For help please see our...

This topside is no longer available this would be the closest replacement: Cal Spa, Peanut, 6000, 6100, 4 Button, Topside, Phone Plug, Temp, Light, Jet, Option This part is a Complete Cal Spa Mini Dash 2010 topside control panel...Button Pattern: Temp,...

You are buying a Cal Spa Genesis 7000 or 9800 System Retrofit Topside that is replacing the original topside that was scrapped because it had so many issues. Generic replacement for Cal Spa dash board style topside control panel.  Replaces...

You are buying a Cal Spa 7000 or 9000 Heater M7 foam type Sensor. This Sensor comes with the wire, Connector, and The foam sensor. It DOES NOT include the tube, the tube side mount or the pull ties. When this sensor is bad it will generally cause a SN...

This part is a Sundance or Jacuzzi Hi Limit with the smaller bulb for 400, 600, 600-S, 750, 95+ with Bypass Heater... LED Hi Limit Sensor for Jacuzzi Hot Tub models J-235, J-245, J-275, and J-280. Fits all Jacuzzi J-200 Series Hot Tubs from 2011 to...

As of 11/2024 Aqua-flo has started to send this pump with a capacitor bump in an odd spot that may affect your installation. In light of that we are now sending this pump assembly out as a separate 10.5 Amp motor and a genuine 2.5 HP XP2 wetend. You...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 10" Aqua Fall Waterfall Assembly with Screws and a 1" slip water connection.. This can be a replacement part for an old waterfall or a new install.. If newly installing it will require some...

This New Old Stock part is a Complete Hot Tub Spa Part Gray 8" Aqua Fall Waterfall Assembly with Screws and a 3/4" slip water connection.. This can be a replacement part for an old waterfall or a new install.. If newly installing it will require some...

This part is a Dimension One, 8 Inch, Ultra Pure, Filter Cover, Gray..  

This part is a Dimension One, New Style, Telescoping Skimmer Weir, Assembly, 8 Inch, Graphite Gray.. Note: The Gray and White versions have been discontinued..