Electronic Control Systems and Parts

You are purchasing a Fuse Holder Assembly, SC-20, 20A, Panel Mount..  This fuse holder requires a fuse sold here: Buss Fuse 20A SC 20 Amp Fuse Part Type Fuse Holder Fuse Style SC Series Fuse...

This part is a Flow Switch Tee Housing with a Barb, Sundance and Jacuzzi Premium Replacement, 3/4" Barb x 3/4" Barb x 3/8" Barb..

The next generation feature rich Balboa BP7 control system with a 4.0KW heater bundled with the sleek rectangle shaped 6 button TP600 topside control with large easy to read backlit LCD screen and simple to follow menus. Kit includes: system, panel,...

This part is a Balboa BP series BP501G3 (Set-Up #1-3), works with TP Series Top Side Panel, Pump1-Blower/Pump2, 4 Pin Molex Connector. This board is used with TP Topsides only.. Circuit Board works in place of: Balboa 56585 HydroQuip 56961 Note -...

This part is a Balboa Heater M7 Sensor with a 82" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This part is a Balboa Heater M7 Sensor with a 46" wire found in some HydroQuip Systems using Balboa Boards.  Sensor Application    Spa ControlSensor Type    Hi Limit, Temp or Hi Limit,...

This kit is a (1) Standard Balboa Board Replacement Repair Relay along with (1) Spade to Spade Jumper and (1) Spead to Loop Jumper used to do a beef up Jumper Style repair on Some Balboa VS and EL Boards and others...  When replacing board relays...

This tool can be used to drill out the hole in the boards when changing out relays.. After you desolder a relay you can use these bits to open the holes up then slide the new relay in the holes and solder.. This also helps you to prevent damage to the...

This kit is a Set of (2) Standard Balboa Board Replacement Repair Relays along with (3) Spade to Spade Jumpers used to do a beef up Jumper Style repair on Some Balboa BP Boards and others...  When replacing board relays you may need this drill bit...

This kit is features a 1 Amp Pressure Switch and (2) Blue Spade connectors that can be used in place of the Tradional Square Pressure Switch found on some Hotspring Tubs by Watkins.. This Switch features 1/8th" MPT Standard Threads and 2 Spade...

This part is a Circuit Board, Jacuzzi (Balboa), R574/R576R1, Value, 6 Pin Phone Cable..   Plug Connection - Phone Style Cable Chip Number - R574/R576R1(x) Circuit Board Application    JacuzziCircuit Board...

This part is a Ground Bar found on many Balboa Brand Spa Hot Tub packs as well as some Gecko SSpa and Mspa packs.