Electronic Control Systems and Parts

Bullfrog Spas OEM BFBP20R1(x) circuit board made by Balboa. This circuit board has been used in many 2013-2018 models and can be used with a few different topside controls but is often paired with...

AMP cable splitter for use with Gecko or Balboa spa packs. This 14/3 splitter is commonly used for the circulation pump and the ozonator to share one receptacle on the main circuit board. It has a 6"...

Sundance and Jacuzzi Flow Switch for 2006-2009 models. Jacuzzi used this switch on all 400 Series models 2006-2009 and in various Sundance models, including in ground units. Includes the tee with...

Balboa Expander circuit board used to add a 2 speed pump output to the VS520SZ, VS520DZ, BP7, LPI501ST, and BP501 based circuit boards and spa packs. This board is found mounted on top of the heater...

LZM1UR1(X) / LZM2UR1 circuit board for Marquis spas that have 2 pumps. This original circuit board may also have part number 54343 and the spa pack or box that houses the board 54342. Supports a 2...

Temperature sensor for the Jacuzzi J-400 and J-1000 models from 2010 - current that uitilize the Nidec Spa pack that has the different colored rubber molded plugs, called a DSMT plug. This sensor has...

Balboa "Y" Splitter used to add an additional Pump # 4 on BP spa packs and control systems such as the BP7 and BP2000. To utilize this splitter you plug the male end into the Pump 2 port, go into the...

Upgrade your spa with the HydroQuip WaterPro BP2000 Retro-Fit Control System with TP700 Color LCD Topside Control, powered by Balboa technology. This premium BP2000 spa control system delivers...

This Plumbing & Glue kit is used to change from a Energy Saver Remote Heater Control Heater to a Standard Heater and is the Plumbing Kit Retrofit fit for some

This part is a 72" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower..

This part is a 60" AMP Style 3 Wire Cord With Male Plug that is used on a 1 speed pump or blower.. Note: To use this cable with a blower you will cut the spade co

This part is a Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 96" Long, Plug Attached, w/Terminated Ends.