Electronic Control Systems and Parts

The MODPACK 202 Low Flow is a universal Low Flow replacement spa control system for (1)Circluation Pump (2) Jet Pumps and Blower System and 12V light. Heater assembly is 15″ long with a 3/4" Barb Connection kit, it is mounted inside of...

Pressure style auto fill kit with interface, auto fill valve and water level sensor made by HydroQuip. For use with the BES6000, BES6005, BCS6000 and BCS6005 Baptismal systems. Made to monitor and maintain your water level in baptistrys.   Includes:...

This part is a Balboa Circuit board for a Artesian Spa with MBP20P5R1A on the board tag.. The compatible topside would be a 4 Pin MOLEX system plug not a phone plug.. The original board number would have been 56346 this is the newest version.. Some of...

This part is a Cable and Plug for an In.Link on system on IN.XE and IN.XM systems Aeware Gecko. The cable is for Pump 1, 2-Speed, 15A, 230V, 8' Cord. Cord Type Cord Appliance Pump, 2-spd Pump Cord Length 8ft, 96" Male End Plug Style in...

This part is a Coleman, Maax, Vita Spa, PC Board, Balboa, MX504SZR1A, (2) Pump System and a Blower Or 3 Pumps..  Light and a Circulation Pump if equipped.. COLEMAN CIRCUIT BOARD 8 PIN PHONE STYLE CONNECTOR CHIP NUMBER MX504SZR1(X) This board is used...

This part is a PC Board, Balboa, LPI501ST, (2) Pump System, Energy Saver, 480-0152 and others. This Board operates (2) Jet pumps or (1) Pump and Blower, Light and a Circulation Pump. Replaces the circuit board LPI501ST for Balboa Control System 56704...

This part is a Circuit Board, Sundance / Jacuzzi, 880/J-400 LCD, 2 Pump, "Perma Clear",**Pump 1=1Spd, Pump 2 =1Spd, w/Circ Pump. This Sundance/Jacuzzi 880 circuit board is for (2) single speed pump systems. This PCB was formerly 6600-180 or...

This Item is a Flow Switch for Jacuzzi or Sundance, ALL 2003+ & Sweetwater Models.. The Housing is 3/4" Barb X 3/4" Barb X 3/8" Barb. Note: Some housings don't have the 3/8" Barb if yours doesn't you need to find the other one that doesn't have...

This part is a Control Box Only, Gecko in.yj-3, P1 (2) , P2, Oz, Lt, V3.   This pack replaces the IN.YJ-1 and IN.YJ-2. This part includes the replacement box only. Gecko in.yj Spa Control No Heater 0612-221041-431 Small package! Zero...

This part is a Amp Cord, Pump 1, 2-Speed, 4-Pin Amp, 14/4, 72"Long, Plug Attached, w/Terminated Ends. The Wire colors are as follow on most systems: Red=High Speed Black=Low Speed White=Neutral or Common Green=Ground There are exceptions to these colors...

This part is a Control System, Balboa, BP Series, BP2000G1, 5.5KW, 800 INC, BP2X, WiFi Capable   Unparalleled system reliability and innovative engineering. Utilizing higher resistant materials, the BP2000/2100 operates: 2-speed primary...

This part is a  New Style Sensor, Hi-Limit (Kit) Watkins, Hot Spot/Solana, Bulb Style w/2 Pin JST Plug, Hold Down Clamp & Insulation.. HIGH LIMIT USED ON 2006+ MODEL HOT SPOT AND SOLANA MODEL SPAS. SENSOR DESIGN HAS CHANGE AND NOW KIT COMES WITH...