Hot Tub Parts of America

This part is a 2 1/2" Pump Union Split Nut Repair Kit which includes the split nut and (2) Screws for use with a 2 1/2" Pump Union. The Pump Union Split Nut that measures about 3 3/4" on the...

  Important NOTE: This pump is not a standard Wua400 it is a 2 1/2" Suction which would measure about 3 5/8" across the threads by 2" which would measure about 3" across the threads..  DO...

This item is a 2 1/8" wear ring that is used between the impeller and the wet end face on Aqua-Flo XP or XP2 Pumps. This wear ring is for all Horse Powers on 48 or 56 frame XP2 Wet Ends. This wear...

This Part is a 2 1/8" wear ring that is used between the impeller and the wet end face on Watkins Vendor Code # 4081, Wavemaster, 4000, 6000, 7000, 8000, 8200, 9000, 9200.. This wear ring serves as...

This wear ring measures 2 3/8" inside Diameter and fits only 3.0HP Aqua-Flo XP2e and Xp3 Impellers.. If you have 1.5, 2.0, 2.5 or 4.0HP they require a different Wear Ring which measures 2 5/8"...

This O-Ring is a NON-Standard 2" Heater or Pump Union O-Ring that measures 2 5/8" Center to Center. The O-Ring is 2 5/8" center to center and fits some unions but most unions are 2...

This Part is (1) NON-Standard 2" Heater or Pump Union Gasket with a 2 5/8" Center to Center Lip. The gasket is 2 7/8" across on the outside the inside diameter is...

This part is (2) Air Bleeder Valve Water Nozzle Wall Fittings that feature a 3/8" Barb that is usually used in a Hot Tub to bleed the air off the pump while filling the tub up. I have seen...

This part is a set of (2) 30 Amp SC-30 Buss or Cooper Bussman Fuse that is 1 5/8" Long X 3/8" wide found on many Balboa , Gecko, Hydroquip , ACC, Nuwave , Len Gordon , Spa Builders and more...

This part is a 2" Slip cap with a 3/8" Barb on the end.. This adapter glues on the street end of a 2" Manifold or PVC plumbing fitting and a 3/8" Inside Diameter Tube glues onto the barb....

This part is a (1) 2" Femail Pipe Thread X 2"Slip Coupler PVC Plumbing Fitting. The Coupler receives a 2" threaded fitting which measures about 2 3/8" OD on one side and then...

This part is a 12" Piece of 2" Flex Pipe used with manifolds, slice valves or unions... The outside of this pipe measures about 2 3/8" Outside Diameter....