Hot Tub Parts of America

You are Buying a 3" Gray Dynasty Starfish Shaped Diverter Knob with Metal Logo in Center only. This Diverter Knob Handle Slides on the Diverter Valve Stem is used to operate the...

This part is a 3/4" Barb Adapter x 3/4" Slip / 1" Street.  The Glue Side glues inside a 1" Fitting (like a coupler) and the inside would accept a 3/4" Pipe flex or hard that would measure...

You are Purchasing a 6" Piece of 3/4" Flex Pipe used with 3/4" Manifolds, Jet Bodies and other fittings...... The list on this part is $12.99.   We have done a lot of extra work...

This Kit consists of 6" of 3/4" Inside Diameter Clear Tubing, (2) Clamps and (1) 1" Street x 3/4" Barb Coupler and (1) 1" Slip x 3/4" Barb Coupler.. This Kit is used to connect your old 3/4" flex...

3/4" Smooth Barb Adapter x 3/4" Slip / 1" Street.  The Glue Side glues inside a 1" Fitting (like a coupler) and the inside would fit a 3/4" Clear Tubing with white spiral connection.

This Kit is a Barb Coupler, Glue, Tubing and Clamps.. Kit includes (1) 3/4" x 3/4" Smooth Barb with 6" of 3/4"ID Tubing and (2) 3/4" Roto Clamps used to extend a 3/4" tube to Barb connection..

This part is a Replacement Watkins Water Check Valve that is 3/4"Barb x 3/4" Barb with Connect kit..  This kit is used to make the connection to existing  3/4" Clear to extend it on either...

This part is a Replacement Watkins Water Check Valve that is 3/4"Barb x 3/4" Barb..   This 3/4" water check valve is installed in the inlet side of the circulation pumps plumbing to prevent the...

This part is a 12" Piece of 3/8" Clear Tubing used with Air Valves... If you need 3 feet order (3x) and it will ship uncut.. This tubing measures 3/8" Inside Diameter and 1/2" O.D. and is used...

This parts is a 36675, Vendor Code 0302, 1.65HP Impeller. Click here for the Seal for this impeller Vico Seal Options Impeller Type Closed Face Impeller Diameter OD 3-13/16" Vane Width...

This 1.0 Horse Power 10.3/3.8 Amp (2) Speed 48 Frame Complete Pump is a Watkins Vendor Code 3536 LX Brand Pump. These pumps usually have the part number 37334-03 on the label for a Watkins Version...

This is an Aqua-Flo 39577 2.0HP Seal Kit & Impeller with a 2 1/8" Eye Width... This Impeller fits between the Face and the Volute of a XP2 Wet End found on some pumps with Vendor Code 4081...